Datasheet

C106 Series
http://onsemi.com
2
MAXIMUM RATINGS (T
J
= 25°C unless otherwise noted)
Characteristic Symbol Max Unit
Peak Repetitive Off−State Voltage (Note 1)
(Sine Wave, 50−60 Hz, R
GK
= 1 kW,
T
C
= −40° to 110°C)
C106B
C106D, C106D1*
C106M, C106M1*
V
DRM,
V
RRM
200
400
600
V
On-State RMS Current
(180° Conduction Angles, T
C
= 80°C)
I
T(RMS)
4.0 A
Average On−State Current
(180° Conduction Angles, T
C
= 80°C)
I
T(AV)
2.55 A
Peak Non-Repetitive Surge Current
(1/2 Cycle, Sine Wave, 60 Hz, T
J
= +110°C)
I
TSM
20 A
Circuit Fusing Considerations (t = 8.3 ms) I
2
t 1.65 A
2
s
Forward Peak Gate Power
(Pulse Width v1.0 msec, T
C
= 80°C)
P
GM
0.5 W
Forward Average Gate Power
(Pulse Width v1.0 msec, T
C
= 80°C)
P
G(AV)
0.1 W
Forward Peak Gate Current
(Pulse Width v1.0 msec, T
C
= 80°C)
I
GM
0.2 A
Operating Junction Temperature Range T
J
−40 to +110 °C
Storage Temperature Range T
stg
−40 to +150 °C
Mounting Torque (Note 2)
−
6.0 in. lb.
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
1. V
DRM
and V
RRM
for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate
voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current
source such that the voltage ratings of the devices are exceeded.
2. Torque rating applies with use of compression washer (B52200F006). Mounting torque in excess of 6 in. lb. does not appreciably lower
case-to-sink thermal resistance. Anode lead and heatsink contact pad are common.
THERMAL CHARACTERISTICS (T
C
= 25°C unless otherwise noted.)
Characteristic Symbol Max Unit
Thermal Resistance, Junction−to−Case
R
q
JC
3.0 °C/W
Thermal Resistance, Junction−to−Ambient
R
q
JA
75 °C/W
Maximum Lead Temperature for Soldering Purposes 1/8 in. from Case for 10 Seconds T
L
260 °C
ORDERING INFORMATION
Device Package Shipping
†
C106B TO−225AA 500 Units / Box
C106BG TO−225AA
(Pb−Free)
500 Units / Box
C106D TO−225AA 500 Units / Box
C106DG TO−225AA
(Pb−Free)
500 Units / Box
C106D1* TO−225AA 500 Units / Box
C106D1G* TO−225AA
(Pb−Free)
500 Units / Box
C106M TO−225AA 500 Units / Box
C106MG TO−225AA
(Pb−Free)
500 Units / Box
C106M1* TO−225AA 500 Units / Box
C106M1G* TO−225AA
(Pb−Free)
500 Units / Box
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*D1 signifies European equivalent for D suffix and M1 signifies European equivalent for M suffix.