OPERATOR’S MANUAL FOR DRINK BLENDER WARNING USE PRE-MIXED GAS ONLY MIXING RATIO GASOLINE : PRE-MIXED OIL FIRST 50 HRS AFTER 50HRS 25 : 1 50 : 1 1.866.438.
Table of Contents 1. Parts List and General Specifications 2. Warnings 3. Before Using Your Drink Blender 4. Operating Instructions 5. General Maintenance 6. Trouble Shooting D ITE STAT ES • UN N E N TA IO VIRONM AGENCY EN • 7. Motor Specifications L PROTEC T “Drink Blender” engine meets Federal EPA standards for gasoline engines pursuant to regulation 40 CFR 90.114.
Warning! Read and follow all safety precautions in the 6. Trouble Shooting operator’s manual. Failure to follow these instructions For hard start-up failure: could result in serious injury. A. Check if fuel line is good. B. Make sure the safety stop bottom is working smoothly. C. Check to see if there is some air in the fuel line. If so, please press or pump the primer ball until the fuel line is clean of any air bubble. D. Check to see if the choke is open. E.
B. Insert the handlebars, line up the screw B tight and secure fit. holes and insert the screws supplied C. WARNING: ALWAYS USE PRE-MIXED GAS ONLY! and fasten them down firmly. D. Mix 50 part gasoline to 1 part 2-cycle oil in a gas container SHAKE Periodically check screws to maintain WELL and pour into fuel tank. Screw E. Your “Drink Blender” uses a standard 2-stroke motor so always use a tight fit. Screws may loosen due to vibration (see image B). C.
B. Insert the handlebars, line up the screw B tight and secure fit. holes and insert the screws supplied C. WARNING: ALWAYS USE PRE-MIXED GAS ONLY! and fasten them down firmly. D. Mix 50 part gasoline to 1 part 2-cycle oil in a gas container SHAKE Periodically check screws to maintain WELL and pour into fuel tank. Screw E. Your “Drink Blender” uses a standard 2-stroke motor so always use a tight fit. Screws may loosen due to vibration (see image B). C.
Warning! Read and follow all safety precautions in the 6. Trouble Shooting operator’s manual. Failure to follow these instructions For hard start-up failure: could result in serious injury. A. Check if fuel line is good. B. Make sure the safety stop bottom is working smoothly. C. Check to see if there is some air in the fuel line. If so, please press or pump the primer ball until the fuel line is clean of any air bubble. D. Check to see if the choke is open. E.
Table of Contents 1. Parts List and General Specifications 2. Warnings 3. Before Using Your Drink Blender 4. Operating Instructions 5. General Maintenance 6. Trouble Shooting D ITE STAT ES • UN N E N TA IO VIRONM AGENCY EN • 7. Motor Specifications L PROTEC T “Drink Blender” engine meets Federal EPA standards for gasoline engines pursuant to regulation 40 CFR 90.114.
