8’Shuffleboard Table Assembly Instruction
PARTS IDENTIFIER (Not To Scale) HI - M8X32 mm Bolt(12) H6 - M8 Allen W rench(1) P5 - Scorer (2) H2 - M8 Washer (12) H3 - 3.5x30 mm Washer Head Screw (24) PI - Left Leg (2) P2 - Right Leg (2) P7-Shuffleboard Dust (1) P6-Drink Hol der (2) H4 - 3.5x18 mm Flat Head Screw (4) H5 - 3.
Step2 Place the game tabletop upside down on a flat surface. Connect the two leg pieces (previous constructed in Step 1) with 6 Washers (H2) and 6 Bolts (H1) by using the Allen Wrench (H6) as indicated in Figure 2. Repeat to attach the other leg. H1 H2 H6 H2 H1 H6 FIG 2 Step3 With the help of a second person, turn the table right side up. Fasten the Scorer (P5) on one corner of the table with 3.5x18 mm Flat Head Screws (H4). Repeat on the opposing corner as indicated in Figure 3 .
OFFICIAL SHUFFLEBOARD TOURNAMENT RULES Shuffle consists of sliding or ”shuffling” eight metal weights over a highly polished playing field. Four of the weights are red and the other four are blue to distinguish the teams or opponents. The object of Shuffleboard is to outscore your opponent by sliding your weights further into the scoring area, this is accomplished either by knocking the opposing weights out of the scoring area or passing them.