User's Manual

Saturn 8700 Specifications Version 1.3
Technical Specifications
Confidential & Proprietary Page 9
3 Technical Specifications
3.1 Product Features
General
Flexible, software configurable, certified
intelligent reader solution
oti advanced Host – Reader TLV based
protocol
Contactless transparent communication
support
Modular design by Hardware and Software
Tamper-proof remote software update
Available as OEM
RF Interface
Bi-directional RF interface between Reader
and Contactless devices
Carrier frequency: 13.56 MHz
Data rate: Up to 848Kbs
Communication Links
USB 2.0 – full speed, CDC, mini USB
connector
RS 232, 8 data bits, no parity, 1 stop bit, full
8-bit binary data. Client defined baud rate
Connectors:
Either a JST 10 pin ZPD interface, located in
the back of the reader and contains a Power,
RS232, USB and External buzzer lines.
Or a mini USB connector located at the back
of the reader and supports USB only. In this
configuration the reader is 5VDC USB
powered.
User Interface
Push Button: x2
4 Payment indication LEDs: Monochrome
Contactless logo: RGB
Audio: Speaker
IN/OUT Signals:
Audio OUT
Digital IN
Digital OUT
Power Requirements
8VDC - 40VDC (Onboard Switch Mode
Power Supply) or 5VDC via USB connector
Max power consumption
Less than 3W (RF signal on) with 8-40VDC
supply
Less than 2.5W (RF signal on) with 5VDC
supply from USB bus
SAM Interface
Two micro SIM Slots
Security
High security encryption system
(3DES/AES/RSA) protects the reader’s
operating system
Vandalism-proof PKI protected software
update mechanism
DUKPT (Derived Unique Key Per
Transaction) support
Offline PIN Authentication support
Secure boot loader (firmware update)
protocol