User's Manual

Saturn User Manual Version 1.00
PCB Mechanical Installation
P/N 1100054F page 2-1
2. PCB Mechanical Installation
2.1 PCB Mounting Dimensions
Figure 2-1: PCB Mounting Drawing
2.2 PCB Mounting Instructions
2.2.1 Enclosure
The SATURN OEM Reader should be mounted in a protective enclosure. The Reader
Board has 4x4.57 mm diameter mounting holes. If mounted on a metallic surface,
spacers are required to prevent contact between the Reader Board and the metallic
surface.
The reader can be mounted directly on to the main controller motherboard. For this
option, the pins of connectors P1and P
6
can be connected to the bottom of the board to
enable piggyback mounting of the reader PCB.
2.2.2 Ventilation
The SATURN OEM Reader Board does not require ventilation for component cooling
purposes.
All dimensions are in millimeters