Dimensions Guide

Technical Data Sheet
V01 - 05-2020 - NA01
ONDURA ® PREMIUM SERIES
ONDULINE ® 3-in HEX FASTENERS
Material / Application
Color matched metal screws for use with ONDURA® PREMIUM
SERIES panels of all styles. Screws are 3 inches in length with a ¼-
inch hexagonal style head for optimal driving into your ONDURA®
panel.
Technical Characteristics
Color
* number varies by panel type, roof design, and other factors
Estimating
Number of Fasteners needed varies by type of panel used, style of
roof, and potentially severe weather conditions in your area. See
installation instructions and/or Technical Data Sheet for the type
of panel you are using on your project.
Installation
Special conditions for installation are required. Please refer to the
installation guide.
This Technical Data Sheet was made based on currently available information as of May 14,
2020. Product was made in accordance with above mentioned parameters, but
producer/distributor can’t anticipate any future change
or any changes in regulations. It is the
consumer’s responsibility to use the product in accordance to producer/distributor
recommendations and their needs. All the claims will be considered with respect to
application recommendations issued by Onduline North America, Inc.
Length
3 inches
Head Size
1/4 Inch
Head Type
Hexagonal
(Hex Head)
Type of Accessory
Fastener
Fasteners per Container
55 Screws
Average Number of Fasteners per
100 sqft. (1 square) of coverage
~110 to 145
Fasteners*
Onduline North America, Inc.
4900 Ondura Drive
Fredericksburg, VA 22407
United States of America