Specification

Specs and Installation Tips

Specifications

Sheet

Size: 48” wide, 79” long, 1 3/8” depth (26.33 sq. ft. per sheet)

Weight: 18 lbs. per sheet

81 lbs. per square

Covered Square (100 sq. ft.) = 4 1/2 sheets

Colors: Red White Brown Tan

Black Green Gray Blue

Slope: 3” in 12” or steeper is recommended

Ridge Caps: 12 1/2” or 19 1/4” wide, 79” long

7” end lap

38 nails per cap

Nails: 1 box of 100-3” nails per 4 sheets

Tile

Size: 48” wide x 19 3/4” long (4 tiles cut from one Ondura sheet)

Weight: 4 1/2 lbs. each

108 lbs. per square

Covered Square (100 sq. ft.) = 24 tiles

(See Ondura Installation Guide for more information.)

Visit us on the web at www.ondura.com or call 800-777-7663.

PAGE 1
Specs and Installation Tips (See Ondura Installation Guide for more information.) Specifications Sheet Size: 48” wide, 79” long, 1 3/8” depth (26.33 sq. ft. per sheet) Weight: 18 lbs. per sheet 81 lbs. per square Covered Square (100 sq. ft.
PAGE 2
Specs and Installation Tips (See Ondura Installation Guide for more information.) Estimating Guide Sheets: Tiles: 4.5 Sheets = 100 sq. ft. 26 nails per sheet 38 nails per ridge cap 1 box nails per 4 sheets Ridge Caps = 6’ coverage each 24 tile (6 sheets) = 100 sq. ft. Shingle nails per tile = 12 Ondura nails per tile = 3 Along ridge and eave = 12 Ridge Tile = Approx.