Instructions / Assembly

6
Drive fasteners on top of the corrugaons
between the overlapping guides
At eaves drive fasteners on top of the
corrugaons above the overlapping
guides
Closure Strips
12.5”
To be
staggered
10.625”
EAVES
Leave a space of 1/4’’ between the rst corrugaon and the rake line in order to provide for the correct fastening of the Verge
Piece. (See Verge secon on page 10.)
Shingles can be temporarily fastened using blind nailing method with standard roong nails. Nail top of shingle in at area
between alignment guides with roong nails following alignment and overlap install guidelines. Make sure temporary fastener
is ush with shingle. Install ONDUVILLA® Fasteners as recommended.
Underlayment
Roof Deck (OSB)
Shingle can overhang 1’’ to 1-1/2”