Instructions / Assembly
10
HIPS TO RIDGE
Secure the waterghtness of the
detail by applying self adhesive
ashing material (Flashing Band.)
Apply a module consisng
of 2 Slim Cap porons (to
be fastened together using
Flashing Band), cung them at
the right angle in accordance
with the slope of the roof.
At the beginning of the roof, the
Verge Piece simply overlaps the
rst corrugaon of ONDUVILLA®.
In addion to the usual fastening
on top of the corrugaon, side
fastening is also necessary to
ensure against wind upli. Side
fastening comes rst, then nalize
with top fastening.
On the opposite side, the roof
may not end with a corrugaon.
Cut shingle and install a 1” x 1”
baen. Bend shingle onto baen
and fasten the Verge Piece through
the baen.
Cut the Slim Cap with an angle
of 45° and fasten it. The ridge
piece has to overlap the hips.
Overlapping
stripes
Top fastening
Side fastening
Verge Piece
Flashing Band
Apron Piece
Approx. 15-3/4”
45°
VERGE
2.4”
Gable end
1
2
3
1 2
2
1
3
Slim Cap
Slim Cap