OFA Kameleon wRF UG rev 3.
OFA Kameleon wRF UG rev 3.fm Page 2 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . .3 Installing Batteries . . . . . . . . . . . . . . . . . . .4 How Kameleon™ Works . . . . . . . . . . . . . . .5 Features And Functions. . . . . . . . . . . . . . . .6 Key Charts. . . . . . . . . . . . . . . . . . . . . . . .7 Device Table . . . . . . . . . . . . . . . . . . . . .12 Adjusting The Display. . . . . . . . . . .
OFA Kameleon wRF UG rev 3.fm Page 3 Monday, September 13, 2004 11:18 AM USER’S GUIDE INTRODUCTION The OFA Kameleon™ 8-Device Remote with RF (URC-9964B00) is a revolutionary universal remote control that uses Universal Electronics’ Kameleon Technology. Moreover, it allows you to consolidate the clutter of all of your original remote controls into one easy-to-use product.
OFA Kameleon wRF UG rev 3.fm Page 4 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF INSTALLING BATTERIES ❶ ❷ NOTE: The two bottom segments of the IR indicator flash when the batteries are running low. The batteries need replacement if one of the following conditions occurs: 1. Pressing any key turns on all keys and icons. 2. The vibration switch no longer activates the display (if the vibration switch feature is still enabled). 3.
OFA Kameleon wRF UG rev 3.fm Page 5 Monday, September 13, 2004 11:18 AM USER’S GUIDE HOW KAMELEON™ WORKS Kameleon™ allows wireless controllers to dynamically change their appearance and functionality, to match the home entertainment environment.Moreover, this technology provides unparalleled ease-of-use and superior control by delivering a uniquely intuitive, graphical interface that intelligently illuminates only the active keys.
OFA Kameleon wRF UG rev 3.fm Page 6 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF FEATURES AND FUNCTIONS Use the illustration to the right to locate features on the OFA Kameleon 8-Device Remote with RF (URC-9960) and then refer to the Key Charts (starting on page 7) to learn how they function. NOTE: The illustration shows all remote control keys. In actual operation, only active keys used by the selected device are displayed and non-active keys are hidden.
OFA Kameleon wRF UG rev 3.fm Page 7 Monday, September 13, 2004 11:18 AM USER’S GUIDE KEY CHARTS. When a key is pressed, the IR Segments animate. Outgoing animation (see arrows) indicates the remote control is sending IR signals to a selected device. Incoming animation (see arrows) indicates the remote control is receiving IR signals from a device being learned (see Using Learning on page 32) Press a Device Key once to select a home entertainment device to control (e.g., DVD).
OFA Kameleon wRF UG rev 3.fm Page 8 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF In the AUX and CBL/SAT modes, use PVR/VOD to access PVR/VOD programs (if available on your cable or satellite service). In the AUDIO mode, use PRESET to access preset stations on your audio device. In the TV mode, use FORMAT to change the aspect ratio or zoom (if feature is available on your TV).
OFA Kameleon wRF UG rev 3.fm Page 9 Monday, September 13, 2004 11:18 AM USER’S GUIDE In the AUX, CBL/SAT, CD, DVD, and PVR modes, use the Cursor Keys to move the cursor in the program guide and menu screens. Use OK to choose options from your selected device’s menu or guide. In the TV or VCR mode, press SCROLL once to access the Cursor and OK Keys. In the AUDIO mode, press SCROLL twice to access the Cursor and OK Keys.
OFA Kameleon wRF UG rev 3.fm Page 10 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF For CD or AUDIO modes, press SKIP once to skip to the next track on your audio device. After programming, press Macro Key 1 – 4 once to run a macro (see Using Macros on page 29). In the CD, DVD, AUDIO, and VCR modes, use the Transport Keys to control the device’s transport. or In the PVR mode, use the LIVE Transport Keys to control PVR/DVR video.
OFA Kameleon wRF UG rev 3.fm Page 11 Monday, September 13, 2004 11:18 AM USER’S GUIDE In the program mode, use the Program Keys to personalize the remote control as follows: Use DEV SET to program your device codes.See Programming Device Control on page 15. Use SEARCH as an alternate way to set up a device by searching available codes. See Searching For Your Code on page 19. Use THEATER to create a custom mode with favorite remote control keys from different devices in your home theater system.
OFA Kameleon wRF UG rev 3.fm Page 12 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF DEVICE TABLE NOTE: Please refer to the table below when performing the instructions in “Programming Device Control” on page 15. After programming, the OFA Kameleon 8-Device Remote with RF will be able to control the following types of devices: DEVICE KEY CONTROLS THESE DEVICES Video Accessory or second device (e.g., Cable Box, Satellite Receiver, DVD Player, etc.
OFA Kameleon wRF UG rev 3.fm Page 13 Monday, September 13, 2004 11:18 AM USER’S GUIDE ADJUSTING THE DISPLAY Your new remote has several ways to adjust the display for your comfort and best use. ADJUSTING BRIGHTNESS The OFA Kameleon 8-Device Remote with RF has five levels of brightness adjustment and is set to the middle one at the factory. To increase or decrease the brightness, perform the following steps: NOTE: Increasing the brightness of the display can decrease battery life. 1.
OFA Kameleon wRF UG rev 3.fm Page 14 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF ADJUSTING HOW LONG THE SCREEN LIGHT IS ON The OFA Kameleon 8-Device Remote with RF allows you to control how long the screen light remains on after the last button is pressed. The display-on time is set at the factory to run for about 8 seconds. To increase or decrease that time, perform the following steps: NOTE: Increasing the display on time can decrease battery life. 1.
OFA Kameleon wRF UG rev 3.fm Page 15 Monday, September 13, 2004 11:18 AM USER’S GUIDE SETTING THE VIBRATION SWITCH The OFA Kameleon 8-Device Remote with RF is set at the factory to turn the display on when you pick it up, before you even press a button (the vibration switch is on). To turn vibration off, perform the following steps. 1. Press and hold SETUP until the two bottom IR segments flash twice. The Program Keys appear. NOTE: Turning off the vibration switch can significantly extend battery life.
OFA Kameleon wRF UG rev 3.fm Page 16 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF To control devices other than the default brands, perform the following steps; otherwise skip this section. NOTE: . To control a Combo device, perform the instructions in “Programming DVD Player/VCR Combo Control” on page 17. 1. Turn on a device (e.g.,VCR or DVD player) and, if applicable, insert media (e.g., cassette or disc). NOTE: Read steps 2 through 9 completely before proceeding.
OFA Kameleon wRF UG rev 3.fm Page 17 Monday, September 13, 2004 11:18 AM USER’S GUIDE 5. Aim the remote control at the device and press POWER once.The device should turn off. If it does not, repeat steps 5 and 6, trying each code for your brand until you find one that works. If it still doesn’t work, try Searching For Your Code on page 19. NOTE: If the device does not have a POWER key, press the (Play) key. 6. If the code works, press OK once.The two bottom IR segments display one long flash. 7.
OFA Kameleon wRF UG rev 3.fm Page 18 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF under the VCR or DVD mode keys. Refer to the Setup Codes for DVD Player/ VCR Combos section. You only need to program one code to control your combo device. 1. Turn on the DVD Player/VCR Combo and insert a DVD. NOTE: Please read steps 2 through 8 completely before proceeding. Before starting step 2, review the “Setup Codes For DVD Player/VCR Combos” (on page 45).
OFA Kameleon wRF UG rev 3.fm Page 19 Monday, September 13, 2004 11:18 AM USER’S GUIDE 7. If the code works, Press OK once. The two bottom IR segments will flash twice. 8. To exit programming, press HOME twice. The display returns to the lastselected device menu screen. SEARCHING FOR YOUR CODE If your device does not respond after trying all codes listed for your brand, or if your brand is not listed at all, try searching for your code. For example, to search for a code for your TV:.
OFA Kameleon wRF UG rev 3.fm Page 20 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF 6. To lock the code, press OK once.The two bottom IR segments flash twice. 7. To search for codes of your other devices, repeat steps 3 to 6. 8. To exit programming, press HOME twice. The display returns to the lastselected device menu screen.
OFA Kameleon wRF UG rev 3.fm Page 21 Monday, September 13, 2004 11:18 AM USER’S GUIDE NOTE: If you enter an invalid number (e.g., 7) or key (e.g., Play), the two bottom IR segments display one long flash and return to the “Other” programming screen. Start again with step 2 above. 7. To check for codes of other devices, repeat steps 4 to 6, but substitute the appropriate device key for each device you are checking. Write down the device’s code digits in the appropriate code boxes on page 17. 8.
OFA Kameleon wRF UG rev 3.fm Page 22 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF FACTORY DEFAULT SETTINGS At the factory, the Control Groups are assigned the following modes as default settings: Video Playback: DVD Volume Controls: AUDIO Channel Controls: CBL/SAT Menu Controls: CBL/SAT If the default settings fit your needs, you can skip programming this mode. Otherwise, perform the steps in the following section to assign device modes to the Control Groups.
OFA Kameleon wRF UG rev 3.fm Page 23 Monday, September 13, 2004 11:18 AM USER’S GUIDE 4. To assign a mode to the Video Playback group, press a device key once (i.e., AUX, CBL/SAT, CD, TV, DVD, AUDIO, VCR, or PVR).Then the Volume Controls programming screen appears: NOTE: . If a device key is animated, it is assigned to this function group. To continue programming the Home Theater mode, you must select a device key, even if it is the same one that is currently animated. 5.
OFA Kameleon wRF UG rev 3.fm Page 24 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF 6. To assign a mode to the Channel Controls group, press a device key once.Then the Menu Controls programming screen appears: NOTE: If a device key is animated, it is assigned to this function group. To continue programming the Home Theater mode, you must select a device key, even if it is the same one that is currently animated. 7.
OFA Kameleon wRF UG rev 3.fm Page 25 Monday, September 13, 2004 11:18 AM USER’S GUIDE 2. Plug in the IR/RF Base Station's power cord to the base station and to the wall plug, as shown in the image to the right: Power Cord 3. Position the IR/RF Base Station so the black IR Lens is aimed at your home theater devices, as shown to the right: 4. To test the IR/RF Base Station, take the OFA Kameleon 8-Device Remote with RF into another room in your home or up to 100 feet away in an open range.
OFA Kameleon wRF UG rev 3.fm Page 26 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF If you are having problems remotely controlling a home theater device from another room, try the following: 1. Plug the 4-foot IR Signal Extension Cord into the back of the IR/RF Base Station. 2. Run the IR Signal Extension Cord to the device that is not in line-ofsight of the IR/RF Base Station. 3.
OFA Kameleon wRF UG rev 3.fm Page 27 Monday, September 13, 2004 11:18 AM USER’S GUIDE OPTIMIZING IR/RF BASE STATION RECEPTION Here are some adjustment tips for optimizing the operation of your IR/RF Base Station: • Aim the OFA Kameleon 8-Device Remote with RF toward the room where the IR/RF Base Station is located. • Do not position the IR/RF Base Station near metal objects, such as heat ducts. Metal can absorb RF signals.
OFA Kameleon wRF UG rev 3.fm Page 28 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF 2. Press VOL once.The Volume Lock programming screen appears: 3. Press a device key once (i.e., AUX, CBL/ SAT, CD, TV, DVD, AUDIO, VCR, or PVR) where you want the volume controls locked to.The two bottom IR segments flash twice and the Program Keys appears again. 4. To exit programming, press HOME once.The display returns to the lastselected device menu screen. 5.
OFA Kameleon wRF UG rev 3.fm Page 29 Monday, September 13, 2004 11:18 AM USER’S GUIDE 4. If desired, repeat steps 2 through 3 (of this section) for each device that you want volume to be unlocked. 5. To exit programming, press HOME once.The display returns to the lastselected device menu screen. 6. Now, after you select a device that has volume unlocked, pressing VOL , VOL , or MUTE controls the device’s volume only in its own mode. UNLOCKING ALL VOLUME CONTROL (RESTORING DEFAULT SETTING) 1.
OFA Kameleon wRF UG rev 3.fm Page 30 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF A macro can be used to control a home theater operation, to set a favorite channel, or for other multiple functions you would like to control with one key press. Moreover, each Macro Key can hold up to 15 key presses total. NOTE: Programming a new macro over an existing one erases the original.
OFA Kameleon wRF UG rev 3.fm Page 31 Monday, September 13, 2004 11:18 AM USER’S GUIDE 5. To save the macro, press and hold SETUP until the two bottom IR segments flash twice. The Program Keys appear again. 6. Exit programming by pressing HOME once. The display returns to the last-selected device menu screen. 7. Now, if you aim the remote control at the devices selected in step 4 and press the programmed Macro Key once, the TV turns on and tunes to channel 3.
OFA Kameleon wRF UG rev 3.fm Page 32 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF and press the Home Theater key once, followed by POWER once.The devices should turn off in this order: Satellite Receiver, DVD Player, Audio Receiver, and TV. To turn on the devices on again in the same order as above, press POWER once. CLEARING A MACRO 1. Press and hold SETUP until the two bottom IR segments flash twice. The Program Keys appear as SETUP flashes repeatedly. 2. Press MACRO once.
OFA Kameleon wRF UG rev 3.fm Page 33 Monday, September 13, 2004 11:18 AM USER’S GUIDE • Do not use the following keys for learning: Device Keys, M1~M4, SETUP, FAV, SCROLL, PRESET, PVR VOD, or Record (•) Key. • Learning capacity is approximately 50 to 75 keys, depending on the code being learned. • If both learned and keymoved functions are assigned to the same key, the last programmed function is stored. • A learned function cannot be used as a source for Keymover (see Using Keymover on page 36).
OFA Kameleon wRF UG rev 3.fm Page 34 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF 4. Place the OFA Kameleon 8-Device Remote with RF head-to-head (about 2" apart) from your original remote control. Also locate the key (on your original remote control) that will serve as the teaching function. 2" 5. On the OFA Kameleon 8-Device Remote with RF, select and press a key where the learned function will be stored.
OFA Kameleon wRF UG rev 3.fm Page 35 Monday, September 13, 2004 11:18 AM USER’S GUIDE 2. Press IR DEL once.The IR Delete programming screen appears: 3. Press a device key once (i.e., AUX, CBL/ SAT, CD, TV, DVD, AUDIO, VCR, or PVR) for the mode where the learned key to be deleted resides. The selected device menu screen, including HOME, appears. 4. Press the learned key to be deleted twice. Upon deletion, the two bottom IR segments flash twice as confirmation. The Program Keys appear again. 6.
OFA Kameleon wRF UG rev 3.fm Page 36 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF REASSIGNING DEVICE KEYS The OFA Kameleon 8-Device Remote with RF can be set to control a second device. For example, to control a TV, a cable box, and two DVD players, you can reassign the unused AUX key to operate the second DVD player as follows: 1. Press and hold SETUP until the two bottom IR segments flash twice. The Program Keys appear as SETUP flashes repeatedly 2. Press MODE once.
OFA Kameleon wRF UG rev 3.fm Page 37 Monday, September 13, 2004 11:18 AM USER’S GUIDE PROGRAMMING KEYMOVER For example, if your DVD player does not have volume control, you can map those keys (i.e., VOL , VOL , and MUTE) from the TV mode to DVD mode: 1. Press and hold SETUP until the two bottom IR segments flash twice. The Program Keys appear as SETUP flashes repeatedly 2. Press OTHER once. The Other programming screen appears: 3. Using the Number Keys, enter 9 9 4.
OFA Kameleon wRF UG rev 3.fm Page 38 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF RESTORING A SINGLE KEYMOVED KEY 1. Press and hold SETUP until the two bottom IR segments flash twice. The Program Keys appear as SETUP flashes repeatedly 2. Press the destination mode once where the keymoved key is stored. Then press OTHER once. The Other programming screen appears: 3. Using the Number Keys, enter 9 9 4.The two bottom IR segments flash twice. 4.
OFA Kameleon wRF UG rev 3.fm Page 39 Monday, September 13, 2004 11:18 AM USER’S GUIDE USING CHANNEL SCAN In the AUX, CBL/SAT, or TV mode, use the FAV key to start a 3-second scan of all channels. If programmed, use the FAV key to scan only your favorite channels to view a channel (see Programming Favorite Channel Scan below). 1. Press AUX, CBL/SAT, or TV once.The two bottom IR segments flash once. 2. Press FAV once.The IR segments display outgoing animation as each channel is changed. 3.
OFA Kameleon wRF UG rev 3.fm Page 40 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF 3. Press OTHER once.The Other programming screen appears: 4. Using the Number Keys, enter 9 9 6. The two bottom IR segments flash twice and display the Favorite Channel programming screen. NOTE: If the two bottom IR segments display one long flash, an error has occurred. Try repeating this step. 5. Using the Number Keys, enter a favorite channel number (e.g., 0 1 2). Then press SETUP once.
OFA Kameleon wRF UG rev 3.fm Page 41 Monday, September 13, 2004 11:18 AM USER’S GUIDE 1. Press and hold SETUP until the two bottom IR segments flash twice. The Program Keys appear as SETUP flashes repeatedly 2. Press OTHER once.The Other programming screen appears: 3. Using the Number Keys, enter 9 7 7. The two bottom IR segments flash twice pause and flash twice again to confirm the unit has been restored to factory default settings. 4. Exit programming by pressing HOME once.
OFA Kameleon wRF UG rev 3.fm Page 42 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF 2. Press OTHER once.The Other programming screen appears: 3. Using the Number Keys, enter 9 8 0.The two bottom IR segments flash twice pause and flash twice again to confirm the unit has been restored to factory default settings. 4. Exit programming by pressing HOME once. The display returns to the lastselected device menu screen.
OFA Kameleon wRF UG rev 3.
OFA Kameleon wRF UG rev 3.
OFA Kameleon wRF UG rev 3.
OFA Kameleon wRF UG rev 3.
OFA Kameleon wRF UG rev 3.
OFA Kameleon wRF UG rev 3.
OFA Kameleon wRF UG rev 3.
OFA Kameleon wRF UG rev 3.
OFA Kameleon wRF UG rev 3.
OFA Kameleon wRF UG rev 3.
OFA Kameleon wRF UG rev 3.fm Page 53 Monday, September 13, 2004 11:18 AM USER’S GUIDE UPGRADE PROCEDURE 1. Call our Consumer Help-Line at: (330) 405-8620 on any business day, between 9 AM and 5:30 PM, EST. 2. Our customer service agent will ask for and record the brand name(s) and model number(s) of your device(s). Then the agent will lead you through the upgrade procedure by asking you to place your telephone’s speaker next to the CH keys on the OFA Kameleon 8-Device Remote (as shown below).
OFA Kameleon wRF UG rev 3.fm Page 54 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF TROUBLESHOOTING PROBLEM: No display at all times. SOLUTION: Replace batteries with four new AA alkaline batteries. PROBLEM: The bottom two IR indicator segments are flashing. SOLUTION: Replace batteries with four new AA alkaline batteries. PROBLEM: No display when programming. SOLUTION: Display has turned off due to inactivity.
OFA Kameleon wRF UG rev 3.fm Page 55 Monday, September 13, 2004 11:18 AM USER’S GUIDE PROBLEM: Favorite channel function does not work properly. SOLUTION: Some devices (e.g.,Cable Boxes or Satellite Receivers) use two-digit channel numbers. During programming, press ENTER or OK once after entering a channel number (e.g., 0 2 ENTER for channel 2). See Programming Favorite Channel Scan on page 39. PROBLEM: Changing channels does not work properly.
OFA Kameleon wRF UG rev 3.fm Page 56 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF DEVICE MENU SCREENS PROGRAMMING MAIN MENU AUDIO MAIN MENU Pressing and holding SETUP displays the Programming Main Menu screen.Use the Program Keys to program device control (DEV SET), code search (SEARCH), home theater mode (THEATER), volume lock (VOL), macros (MACRO), display brightness ( ),function learning (IR LRN and IR DEL), device key reassignment (MODE), or other functions (OTHER).
OFA Kameleon wRF UG rev 3.fm Page 57 Monday, September 13, 2004 11:18 AM USER’S GUIDE AUDIO SURROUND MENU Pressing SCROLL once (on the AUDIO Main Menu, as shown on the previous page, right side) displays the AUDIO Surround Menu screen.Use these keys to remotely control your Audio Receiver’s or Amplifier’s volume, stations, and surround functions. Device Menu Screens AUDIO MENU Pressing SCROLL once (on the AUDIO Surround Menu, as shown on the left) displays the AUDIO Menu screen.
OFA Kameleon wRF UG rev 3.fm Page 58 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF AUDIO PRESETS MENU AUX MAIN MENU Pressing SCROLL once (on the AUDIO Menu, as shown on the previous page, right side), displays the AUDIO Presets Menu screen.Use these keys to remotely access your Audio Receiver’s or Amplifier’s preset stations. Pressing AUX once displays the AUX Main Menu screen.
OFA Kameleon wRF UG rev 3.fm Page 59 Monday, September 13, 2004 11:18 AM USER’S GUIDE AUX PVR/VOD MENU CBL/SAT MAIN MENU Pressing SCROLL once (on the AUX Main Menu, as shown on previous page, right side) displays the AUX PVR/VOD Menu screen.Use these keys to remotely control all your device’s VOD and PVR functions, such as transport keys, replay, and live TV. Pressing CBL/SAT once displays the CBL/SAT Main Menu screen.
OFA Kameleon wRF UG rev 3.fm Page 60 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF CBL/SAT PVR/VOD MENU CD MAIN MENU Pressing SCROLL once (on the CBL/ SAT Main Menu, as shown on previous page, right side) displays the CBL/SAT PVR/VOD Menu screen.Use these keys to remotely control all your device’s VOD and PVR functions, such as transport keys, replay, and live TV. Pressing CD once displays the CD Main Menu screen.
OFA Kameleon wRF UG rev 3.fm Page 61 Monday, September 13, 2004 11:18 AM USER’S GUIDE DVD MAIN MENU Pressing DVD once displays the DVD Main Menu screen.After device programming, use these keys to remotely control all your DVD player’s common features, such as transport keys and menu, navigation, subtitle, and audio functions. Device Menu Screens HOME THEATER MAIN MENU After mode programming, pressing Home Theater once displays the Home Theater Main Menu screen.
OFA Kameleon wRF UG rev 3.fm Page 62 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF PVR MAIN MENU Pressing PVR once displays the PVR Main Menu screen.After device programming, use these keys to remotely control all your PVR’s (or DVR’s) common features, such as transport keys and menu, guide, navigation, replay, and live TV functions. 62 TV MAIN MENU Pressing TV once displays the TV Main Menu screen.
OFA Kameleon wRF UG rev 3.fm Page 63 Monday, September 13, 2004 11:18 AM USER’S GUIDE TV MENU Pressing SCROLL once (on the TV Main Menu, as shown on previous page, right side) displays the TV Menu screen.Use these keys to remotely control all your TV’s common menu features. TV PIP MENU Pressing SCROLL once (on the TV Menu, as shown on the left) displays the TV PIP Menu screen.Use these keys to remotely control all your TV’s common PIP features.
OFA Kameleon wRF UG rev 3.fm Page 64 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF VCR MAIN MENU VCR MENU Pressing VCR once displays the VCR Main Menu screen.After device programming, use these keys to remotely control all your TV’s common features, such as volume and channels, and last channel, menu, and information/display functions. Pressing SCROLL once displays a secondary VCR menu (on the right).
OFA Kameleon wRF UG rev 3.fm Page 65 Monday, September 13, 2004 11:18 AM USER’S GUIDE CUSTOMER SUPPORT could void the user's authority to operate his equipment. For assistance, please contact us in any of the following ways: FCC Authorization Label • E-mail: ofasupport@ueic.com • Internet: http:// www.oneforall.
OFA Kameleon wRF UG rev 3.fm Page 66 Monday, September 13, 2004 11:18 AM KAMELEON 8-DEVICE REMOTE WITH RF CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF WARRANTY.ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
OFA Kameleon wRF UG rev 3.fm Page 67 Monday, September 13, 2004 11:18 AM USER’S GUIDE • Disabling the vibration switch (see “Setting the Vibration Switch” on page 15). The two bottom IR indicator segments will flash when the batteries in your Kameleon are running low. SPECIFICATIONS Remote Control Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 AAA Batteries IR/RF Base Station Power Cord Power . . . . . . . . . . . . . . . . . .
OFA Kameleon wRF UG rev 3.
