User manual

ManualsBrandsOne For All ManualsRemote ControlsUniversal Remote (URC-8910)

USING COMMERCIAL SKIP

The URC-8910 remote control includes a unique Commercial Skip

feature,once programmed, that will allow you to skip viewing com-

mercials by pressing the COM SKIPkey.Then,as you change chan-

nels (to view another program without commercials),an internal

timer will count down a preset time interval before returning the

device to the original channel.

Programming Commercial Skip

For example,let’s assume you are watching a national sports event

on channel 2 that consistently breaks for one-minute commercials.

Meanwhile,cable channel 26 is showing a favorite action movie

without commercials.By performing the following steps,you can set

Commercial Skip to automatically return the cable converter to the

sports event after one minute of viewing the movie:

NOTE: Commercial Skip only works in the following modes:

VCR

DVD

CBL

,and

SAT

1. Select the device where channels will be changed

(e.g.,CBL).

2. On the URC-8910 remote control,press and hold

COM SKIPuntil you see the display change from the

current device and time to [CHANNEL].

NOTE: The device,its code,and time are examples.Your

remote control settings may be different.

NOTE: To exit programming at any time, press

EXIT

once or

allow 30 seconds of inactivity to lapse.You will see

[EXIT

SETUP]

as the remote control returns to normal operation.

NOTE:

[INVALID]

means you have inadvertently pressed an

incorrect key.Note your error and continue programming.

3. Use the keypad to enter a favorite channel number

(e.g.,002).The display will show your entry.

NOTE: If the original remote control required pressing an

Enter key to change the channel,also press the

ENTER

key

after the channel number (e.g.,

ENTER

). However, the

display will not show the

ENTER

key.

NOTE: If you made a mistake during entry, press

EXIT

once.

You will see

[EXIT SETUP]

as the remote control returns to

normal operation.Then try programming Commercial Skip

again starting with step 1.

4. Press SELECTonce to accept your channel entry.You

will see the display change to [30 SEC].

SELECT