OFA 10L with Learning Owners Manual.
OFA 10L with Learning Owners Manual.fm Page 1 Thursday, January 27, 2005 1:34 PM OWNER’S MANUAL TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Features and Functions . . . . . . . . . . . . . . . . . . . . . . .2 Key Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Device Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . .
OFA 10L with Learning Owners Manual.fm Page 2 Thursday, January 27, 2005 1:34 PM ONE FOR ALL 10L UNIVERSAL REMOTE CONTROL WITH LEARNING Setup Codes for DVD-RW Players (Códigos de Configuración para Reproductores DVD-RW) . . 62 Setup Codes for DVD-R Players (Códigos de Configuración para Reproductores DVD-R) . . . . 62 Setup Codes for Media Center PCs (Códigos de Configuración para Computadoras Centro de Entretenimiento Multimedia) . . . . . . . . . . . . . . .
OFA 10L with Learning Owners Manual.fm Page 3 Thursday, January 27, 2005 1:34 PM OWNER’S MANUAL KEY CHARTS The LED (red light), which is located underneath the POWER Key, blinks to show that the remote control is working and is sending signals. Press TV, CBL, SAT, VCR, DVD, CD, PVR, AUD, AUX1 or AUX2 once to select a desired home entertainment device to control. Press POWER once to turn on or off the selected device. For master power control, see “Programming a Master Power Macro” on page 10.
OFA 10L with Learning Owners Manual.fm Page 4 Thursday, January 27, 2005 1:34 PM ONE FOR ALL 10L UNIVERSAL REMOTE CONTROL WITH LEARNING Use CH + (or CH -) to select the next higher (or lower) channel. Press PREV once to recall the last-viewed channel and to page back one screen on the main menu. In the AUD, DVD and CD modes, use DISC to change disk (if available on your device). Use the keypad (1 ~ 9 and 0) to directly select channels (e.g., 009 or 031).
OFA 10L with Learning Owners Manual.fm Page 5 Thursday, January 27, 2005 1:34 PM OWNER’S MANUAL Press SLEEP to activate your device's sleep timer (not available for all devices). Use CC to turn on closed caption or subtitles. If you have a PVR/DVR device, use SHOWS to access your list of recorded shows. Use FORMAT to change the Aspect Ratio of your display (16:9). If you have a PVR/DVR device, use LIVE to return to live programming.
OFA 10L with Learning Owners Manual.fm Page 6 Thursday, January 27, 2005 1:34 PM ONE FOR ALL 10L UNIVERSAL REMOTE CONTROL WITH LEARNING INSTALLING BATTERIES 1. 6 2. Obtain four (4) new AAA alkaline batteries. Match the + and – marks on the batteries to the + and – marks in the battery case, then insert the new batteries. 3. Slide the battery cover back into place. The tab should click when the cover is locked.
OFA 10L with Learning Owners Manual.fm Page 7 Thursday, January 27, 2005 1:34 PM OWNER’S MANUAL 4. Test the remote control by first pressing POWER and then any mode key (e.g., TV). If the batteries are inserted correctly, the LED (red light) will blink once. NOTE: When batteries are low, the remote control will blink 5 times after each key press. The remote will stop operating when the batteries need replacement.
OFA 10L with Learning Owners Manual.fm Page 8 Thursday, January 27, 2005 1:34 PM ONE FOR ALL 10L UNIVERSAL REMOTE CONTROL WITH LEARNING CD Code: Brand Name:_____________________ AUD Code: Brand Name:_____________________ CBL Code: Brand Name:_____________________ SAT Code: Brand Name:_____________________ DVD Code: Brand Name:_____________________ PVR Code: Brand Name:_____________________ AUX1 Code: Aux.
OFA 10L with Learning Owners Manual.fm Page 9 Thursday, January 27, 2005 1:34 PM OWNER’S MANUAL NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter the same code again. 5. Aim the remote control at the device and press POWER once. It should turn off. If the device does not respond, repeat steps 2 through 4, trying each code for your brand until you find one that works. If it still does not work, try “Searching for Your Code”, below.
OFA 10L with Learning Owners Manual.fm Page 10 Thursday, January 27, 2005 1:34 PM ONE FOR ALL 10L UNIVERSAL REMOTE CONTROL WITH LEARNING USING MACROS the channel, also press ENTER after the channel number (e.g., 0 5 2 ENTER). You can program the M1 ~ M3 keys on your One For All 10L Universal Remote Control with Learning (URC-10820 B00) to perform repetitive, time-consuming operations for easy, convenient access through the press of a single key.
OFA 10L with Learning Owners Manual.fm Page 11 Thursday, January 27, 2005 1:34 PM OWNER’S MANUAL To Operate Master Power Macro 1. After programming, point the remote control at the devices and press POWER for at least 2 seconds to sequentially turn on (or off) your devices. 1. Press and hold SET until the LED (red light) blinks twice, then release SET. 2. Enter 9 9 5. The LED will blink twice. 3. Press the DVD key once.
OFA 10L with Learning Owners Manual.fm Page 12 Thursday, January 27, 2005 1:34 PM ONE FOR ALL 10L UNIVERSAL REMOTE CONTROL WITH LEARNING 4. Press and hold SET until the LED blinks twice, then release SET. The macro is now deleted but the keys (in the case of POWER and device keys), will retain their original function. NOTE: Only channels of one mode can be stored for Favorite Channel Scan. 1. On the remote control, press TV, VCR, DVD, CBL or SAT once. 2.
OFA 10L with Learning Owners Manual.fm Page 13 Thursday, January 27, 2005 1:34 PM OWNER’S MANUAL • Learned keys are mode specific, so each one can store a unique function for each mode. • Learned keys can be used in macros (see “Using Macros” on page 10). • Do not use the following keys for learning: Device Keys, SETUP, FAV, or Record (•) Key. • Learning capacity is approximately 50 to 70 keys, depending on the code being learned.
OFA 10L with Learning Owners Manual.fm Page 14 Thursday, January 27, 2005 1:34 PM ONE FOR ALL 10L UNIVERSAL REMOTE CONTROL WITH LEARNING 4. Press the learning key (e.g., L1) to be deleted twice. The LED will blink twice after the second press. 5. To clear additional functions stored on other learning keys, repeat steps 1 through 4 (in this section).
OFA 10L with Learning Owners Manual.fm Page 15 Thursday, January 27, 2005 1:34 PM OWNER’S MANUAL NOTE: The following keys cannot be used as a source or destination: TV, CBL, SAT, VCR, DVD, CD, PVR, AUD, AUX1, AUX2, FAV, and SET. PROGRAMMING KEYMOVER For example, if your VCR does not have volume control, you can map those keys (i.e., VOL +, VOL -, and MUTE) from the TV mode to the VCR mode as follows: 1. Press and hold SET until the LED (red light) blinks twice, then release SET. 2. Enter 9 9 4.
OFA 10L with Learning Owners Manual.fm Page 16 Thursday, January 27, 2005 1:34 PM ONE FOR ALL 10L UNIVERSAL REMOTE CONTROL WITH LEARNING UNLOCKING VOLUME CONTROL FOR A SINGLE DEVICE (INDIVIDUAL VOLUME UNLOCK) RESTORING FACTORY DEFAULT SETTINGS 1. After performing Global Volume Lock (see left), press a desired mode key where you want volume to be unlocked (e.g., AUD) and controlled within its own mode. 2. Press and hold SET until the LED (red light) blinks twice, then release SET.
OFA 10L with Learning Owners Manual.fm Page 17 Thursday, January 27, 2005 1:34 PM OWNER’S MANUAL If the code for your home entertainment or home automation device is not in our database, we will need to “capture” the code for that device from its original remote control. A new code would then be created and entered into your One For All 10L Universal Remote Control with Learning (URC-10820 B00). If necessary, the Customer Support representative can instruct you how to begin the capture procedure.
OFA 10L with Learning Owners Manual.fm Page 18 Thursday, January 27, 2005 1:34 PM ONE FOR ALL 10L UNIVERSAL REMOTE CONTROL WITH LEARNING PROBLEM: Changing channels does not work properly. SOLUTION: If the original remote control required pressing ENTER to change channels, then press ENTER on the remote control after entering the channel number. PROBLEM: SOLUTION: PROBLEM: SOLUTION: PROBLEM: During learning, LED emits a long blink after pressing and holding key to be learned.
OFA 10L with Learning Owners Manual.fm Page 19 Thursday, January 27, 2005 1:34 PM OWNER’S MANUAL However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna.
OFA 10L with Learning Owners Manual.fm Page 20 Thursday, January 27, 2005 1:34 PM ONE FOR ALL 10L UNIVERSAL REMOTE CONTROL WITH LEARNING International Ltd. is the Licensee of the ONE FOR ALL® brand for USA and Canada. Copyright 2005 by Universal Electronics Inc.