Operation Manual

WWW.ONEFORALL.COM 5
8 MUTE Key
T
he Mute key operates the same function it did on your orginal
remote control. Also, if your original remote control required that
you press an “OK” or “ENTER” key during Menu operation, the
M
ute key can be used for this function.
9 V
olume +/- Keys
These keys operate in the same way as the keys on your original
r
emote. If available on your original remote, these keys will allow
y
ou to navigate through the menu.
10 D
VD Keys
After pressing the DVD key, these keys operate the functions of your
DVD player / DVD-R. To prevent accidental recording, the Record key
m
ust be pressed twice to start recording.
11 Teletext and Fastext Keys
A
fter pressing the TV key, the top row of the DVD keys is used to
operate the main Teletext functions. The symbols below the keys are
for Teletext. The text keys are used to access the Teletext functions
of your television. Of course, your television must have Teletext
c
apability.
TEXT ON: Puts the television in the Teletext mode.
TEXT OFF: Switches the television back to regular viewing mode. On
some televisions, this may be done by pressing the TEXT ON key
several times.
HOLD/STOP: Stops changing pages.
EXPAND: Shows the top half of the Teletext page in larger letters.
By pressing again, you can see the bottom half of the Teletext page
enlarged. To return to regular Teletext viewing, press the EXPAND
key again, or press the TEXT ON key, depending on your television.
After pressing the TV key and accessing the text mode, the bottom row of
the keys marked red, green, yellow and blue, allow you
to access the Fastext functions of your television. If on your original
remote control these keys are used for Menu navigation, the ONE
FOR ALL Fastext keys may operate in the same way.
?
i
?
i
?
i
?
i
Important note: For a more detailed explanation of Teletext and Fastext,
please refer to the manual of your television. Remember, different televisions
control Teletext and Fastext features in different ways. Not all of the Teletext
functions may be available for your particular model.
705027_3426_S-10:Ecoline 2_Rubber_Scand_10_Talen_3426 13-03-2007 01:03 Pagina 5