Instruction manual

Align both remotes also in height
Place both remote controls on a flat surface. Make sure that the ends you
normally point at your device are facing each other.
2 - 5 cm
WWW.ONEFORALL.COM 7
Learning (COPY)
The Learning feature allows you to Learn (Copy) one or more functions from
your (working) original TV and/or Digital TV Receiver remote control onto your
ONE FOR ALL remote.
Example: How to learn (copy) the “I/II (mono/stereo)“ function from your original
remote onto the “red key” on your ONE FOR ALL remote control.
If your TV brand is listed f
or your region (see page 4) please follow
the same steps (A - B from SimpleSet on page 5), except;
• during step A press and hold red & blue for 3 seconds.
• During step B press and hold the “DIGIT KEY assigned
to your TV brand” (e.g. 1 for Bush)
If your TV brand is NOT listed for your region (see page 4)
please follow the same steps (A - C from Auto search on page 6), except;
• during step A press and hold red & blue for 3 seconds.
Main TV Control
F
or your convenience it is also possible
to program your ONE FOR ALL remote
t
o control the Volume, Power and
Input of your TV.
A
TV POWER
TV VOL+/- and MUTE
TV INPUT/AV
URC-6420_21t_RDN-4300611:Simple_base_10x22 30-06-11 17:16 Pagina 7