URC-6540 URC-6541 Universal Remote Universal-Fernbedienung Télécommande Universelle UK USER GUIDE & CODE BOOK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p. 2 D BEDIENUNGSANLEITUNG & EINSTELLCODES . . . . p. 22 F MODE D’EMPLOI & LISTE DES CODES . . . . . . . . . . . . . . . . . . p.
UK Table of Contents ABOUT YOUR AUDIO ZAPPER 3 FEATURES AND FUNCTIONS 5 INSTALLING THE BATTERIES 7 INSTALLATION 8 Direct Set-Up 8 Key Lock/Unlock 10 Input Select Toggle 11 Search Method 12 Quick Code Reference ADVANCED FEATURES 15 16 Mode Reassignment 16 Learning Feature 17 TROUBLE SHOOTING 20 Helpful Hints 20 Consumer Help-Line SET-UP CODES 2 21 62 WWW.ONEFORALL.
About your AUDIO ZAPPER Thank you for purchasing the AUDIO ZAPPER universal remote control (URC-6540 or URC-6541). Your Zapper package contains: • The AUDIO ZAPPER Remote Control • The AUDIO ZAPPER User Guide and Codebook The User Guide and Code Book explains in simple steps how to set-up and operate your new universal remote control. You may need this guide again in the future, so please be sure to keep it. Your AUDIO ZAPPER requires 2 new "AAA/LR03" Alkaline batteries.
About your AUDIO ZAPPER MAGIC Power Device Keys Programme +/ Track + Volume - Volume + Mute Programme -/ Track Transport Keys 4 WWW.ONEFORALL.
Features and Functions Function LED The LED (Light Emitting Diode) flashes as soon as you press any valid key. It is also used during set-up for user feed back. MAGIC Magic Key The MAGIC key is used to set-up your AUDIO ZAPPER and to access special features. Power Key The Power key will turn your Amplifier/Tuner both on and off when in the TUN mode. This key may also open and close your CD tray when in the CD mode.
Features and Functions Function If Magic is first pressed, the programme +/ - keys will search up and down for the next available station of your tuner. After pressing the CD key, the Programme +/– keys change the track of your CD player up and down. If Magic is first pressed, the Programme +/- change the disc up and down if this function is available for your CD player. Transport Keys The Play key will cause your CD, MD, or Audio Cassette to begin to play, depending upon what mode key you have selected.
Installing the Batteries The AUDIO ZAPPER needs 2 new "AAA/LRO3" alkaline batteries. 1 Remove the battery cover from the back of the AUDIO ZAPPER by pressing down on the tab. 2 Match the batteries to the +/marks inside the battery case, then insert the batteries. 3 Press the battery cover back into place. Important notes: - It is best that you do not use rechargeable batteries.
Direct Set-Up Setting Up Your Amplifier/Tuner The following instructions allow you to set-up your Audio System whether it be a Micro-System, MiniSystem, or separate components. Find your HI-FI code in the Set-Up code section (starting on page 62). Codes are listed by brand name. The most popular code is listed first. Make sure that your HI-FI set is switched on. 1 2 3 TUN MAGIC ______ Press and release the TUN key.
Direct Set-Up Example for setting up a Pioneer Mini-System One Amplifier/Tuner Set up code 121312 programmed on the TUN device key controls four of the function keys (Power, Volume +, Volume -, and F). These keys should be locked according to the instructions on page 10. These functions will remain after locking each key. A second Amplifier/Tuner code 111143 could then also be programmed on the TUN device key to control the Programme + and Programme – for the Tuner.
Key Lock/Unlock The Key Lock feature allows you to retain a function from the currently programmed code. The locked keys remain even after another code has been programmed on the same device key. To Lock a function: 1 2 TUN MAGIC Press and release the device key (TUN, CD, TAPE or MD). Press and hold down MAGIC until the red light blinks twice (the light will blink once then twice). 3 Next, press Programme -, Programme +, Programme (the LED will blink twice).
Input Select Toggle (F Key) The F (Function) key is designed to select the input of your HiFi. The Input Select Toggle allows you to use the F (Function) key to cycle through your inputs. If the F key is not changing the input: 1 MAGIC 2 Press and hold down MAGIC until the light blinks twice (the light will blink once then twice). Press Programme -, Programme +, Volume - (The light blinks twice). The Input Select Toggle is now programmed.
Search Method If your Audio System does not respond to the AUDIO ZAPPER after trying all the codes listed for your brand, try searching for your code. You may also try the Search Method when your brand is not listed at all. To search for your Amplifier/Tuner code: 1 2 3 Turn on your Amplifier/Tuner. TUN MAGIC 6 Then, press and hold the MAGIC key until the LED blinks twice (the LED will blink once then twice). Next, press the Programme - key three times. 4 5 Press the TUN key on the AUDIO ZAPPER.
Search Method Important notes: - When you want to control your device, press the device key first (TUN, CD, TAPE, or MD). - To search for the code for your CD Player or Audio Cassette Player, follow the same instructions above, only press the CD or TAPE key during step 2 and alternate between CD or TAPE and the PLAY key while performing the search. - During step 5, you may have to press these keys many times (up to 150!), so be patient.
Search Method 6 For the third digit, press Programme+ and count all the red blinks. 7 For the fourth digit, press Programme- and count all the red blinks. 8 For the fifth digit, press MUTE and count all the red blinks. 9 For the sixth digit, press PLAY and count all the red blinks. 10 Now you have your 6-digit code. Write the codes for your devices in the boxes in the battery compartment and on page 15 for easy, future reference.
Quick Code Reference The pages 62-71 list the codes for your equipment. The most popular codes for each brand are listed first. Write down the codes for your devices in the boxes below and in the battery compartment for quick and easy reference. Device Type ______________________ ______________________ ______________________ ______________________ ______________________ WWW.ONEFORALL.
Advanced Features Mode Reassignment As the TUN, CD, and MD device keys all provide access to Amplifier/Tuner, Amplifier, CD and MD codes, it is not necessary to reassign device keys unless you would like to operate a second Audio Cassette Player. You could, as an example, use the MD key to operate Deck B of your Audio Cassette Player. To reassign the MD device key as a second Audio Cassette device key: 1 MAGIC 2 Press and hold down MAGIC until the light blinks twice (the LED will blink once then twice).
Advanced Features Learning Feature The AUDIO ZAPPER comes with a complete library of preprogrammed codes. After you have set up the AUDIO ZAPPER for your device, you may find that there are one or more keys which you had on your original remote which do not have a place on the AUDIO ZAPPER keypad. As a convenience, the AUDIO ZAPPER offers a special Learning feature that allows you to copy any function from your original audio remote control onto the keypad of the AUDIO ZAPPER.
Advanced Features 5 Press the key (on the AUDIO ZAPPER remote) where you want to place the learned function (the LED will flash rapidly). 6 Press and hold the key (on your original remote) that you want to copy until the LED on the AUDIO ZAPPER blinks twice. 7 If you want to copy other functions within the same mode, simply repeat steps 5 and 6 pressing the next key you want to copy by learning.
Advanced Features To delete a learned function: It is possible to delete all learned functions or only individual learned functions. To delete individual learned functions, follow the steps as outline below. 1 Press and hold MAGIC until the light blinks twice (the light will blink once then twice). 2 Press Programme -, Volume -, Volume (the LED will blink twice). 3 Press the device key in which the function will be deleted.
Trouble Shouting Helpful Hints Problem: Solution: The red light does not blink when you press a key? Replace batteries with 2 new "AAA/LR03" alkaline batteries. The AUDIO ZAPPER does not respond after pressing a key? Make sure you are using new batteries and are aiming the AUDIO ZAPPER at your device. The AUDIO ZAPPER does not operate your device? A) Try all the codes listed for your brand. B) Try the search method. Your brand is not listed in the AUDIO ZAPPER code section? Try the search method.
Trouble Shooting CUSTOMER SERVICE If you still have questions about the operation of your AUDIO ZAPPER universal remote and you could not find the answer(s) in the trouble shooting section, you may want to contact the customer service department for assistance. You may care to visit our Internet-site: www.oneforall.
D Inhaltsverzeichnis WISSENSWERTES AUDIO ZAPPER 23 FUNKTIONSTASTEN 25 BATTERIEWECHSEL 27 EINSTELLEN DER AUDIO ZAPPER 28 Direkteinstellung 28 Taste-Sperre/Aufhebung der Tasten-Sperre 30 Input Selekt Möglichkeit 31 Code-Suchlauf 32 Code-Beschreibung 35 ZUSÄTZLICHE FUNKTIONEN 36 Gerätetaste neu belegen 36 Lernfähigkeit 37 NÜTZLICHE HINWEISE 40 EINSTELLCODES 62 22 WWW.ONEFORALL.
Wissenswertes über Ihre AUDIO ZAPPER Vielen Dank für den Kauf der ONE FOR ALL "AUDIO ZAPPER" Universal-Fernbedienung (URC6540 oder URC-6541). Die Zapper-Verpackung enthält: • Die AUDIO ZAPPER Fernbedienung • Die AUDIO ZAPPER Bedienungsanleitung & Einstellcodes Das Handbuch erklärt in einfachen Schritten wie Sie Ihre Universal-Fernbedienung einstellen können. Bewahren Sie das Handbuch sorgfältig auf für eventuelles zukünftiges Nachschlagen. Ihre AUDIO ZAPPER benötigt 2 neue "AAA/LR03" Alkalibatterien.
Wissenswertes über Ihre AUDIO ZAPPER MAGIC Ein/Aus Gerätetasten Programme +/ Track + Lautstärke - Programme -/ Track - Lautstärke + Stummtaste Betriebstasten F-taste 24 WWW.ONEFORALL.
Funktionen Funktion LED Die Leuchtdiode (LED) leuchtet rot, wenn die Fernbedienung eingeschaltet ist. Sie wird auch beim Einstellen benutzt zur Bequemlichkeit des Benutzers. MAGIC MAGIC-Taste Die MAGIC-Taste dient dazu, die AUDIO ZAPPER einzustellen und die besondere Funktionen aufzurufen. Ein/Aus-Taste Die Ein/Aus-Taste eignet sich zum ein- und ausschalten Ihres Verstärkers/Tuners wenn Sie im Tuner-Modus sind. Sie wird auch das Schubfach Ihres CD-Spielers öffnen und schließen wenn Sie im CDModus sind.
Funktionen Funktion die vorprogrammierten Sender Ihres Tuners änderen. Drücken Sie zuerst die Magic-Taste, dann starten die Programmtasten den Sendersuchlauf auf Ihrem Tuner. Nachdem Sie die CD-Taste gedrückt haben, übernehmen die Programmtasten die Skip-Funktion Ihres CD-Spielers. Drücken Sie zuerst die Magic-Taste, dann übernehmen die Programmtasten die CD-Wechsler-Funktion, d.h. wenn Sie diese Funktion auch auf der Original Fernbedienung hatten.
Batteriewechsel Die AUDIO ZAPPER benötigt 2 neue "AAA/LR03" Alkalibatterien. 1 Entfernen Sie den Deckel des Batteriefachs auf der Rückseite der AUDIO ZAPPER. 2 Legen Sie die Batterien der (+)und (-)-Markierung entsprechend in das Battteriefach ein. 3 Drücken Sie den Deckel wieder auf das Bateriefach, bis er einrastet. Wichtig: - Es ist besser keine nachladbaren Batterien zu verwenden.
Direkteinstellung Das Einstellen Ihres Verstärkers/Tuners Mit der folgenden Schritten können Sie Ihre Hi-FiAnlage einstellen, ob es nun ein Mikro-, MiniSystem oder aus verschiedene Teile aufgebaut ist. Suchen Sie den Code Ihrer Hi-Fi-Anlage im Kapitel "Einstellcodes" (Seite 62). Die Codes sind aufgelistet nach Markennamen. Die gängigsten Codes sind jeweils an erster Stelle aufgeführt. Schalten Sie Ihre Hi-Fi-Anlage ein. 1 TUN 2 MAGIC 3 ______ Drücken Sie kurz die TUN-Taste der AUDIO ZAPPER.
Direkteinstellung Wenn alle Tasten funktionieren statt der F-Taste, sehen Sie dann nach auf Seite 31 für das Einstellen der Input Select-Taste. Notieren Sie den Code Ihrer Hi-Fi-Anlage in den dafür vorgesehenen Kästchen und auf der Innenseite des Batterie-fachdeckels, damit Sie den Code bei Bedarf rasch nachschlagen können.
Tasten-Sperre / Aufhebung der Tasten-Sperre Mit der Tasten-Sperre können Sie eine Funktion erhalten von dem Code, den Sie jetzt programmiert haben. Diese gesperrte Taste bleibt auch erhalten nachdem Sie einen anderen Code auf der gleichen Taste programmiert haben. Das sperren einer Funktion: 1 TUN 2 MAGIC Drücken Sie kurz die Gerätetaste.
Input Selekt-Quellenwahltaste (F-Taste) Mit der Funktionstaste können Sie die Quellen Ihres Verstärkers/Tuners selektieren. Mit der Input Selekt-Funktion können Sie mit der F-Taste die verschiedenen Quellen anwählen. Wenn die F-Taste nicht die Quellen ändert: 1 MAGIC 2 Drücken Sie die Magic-Taste und halten Sie die gedrückt bis die Leuchtdiode zweimal blinkt (die Leuchtdiode blinkt erst einmal, dann zweimal). Drücken Sie Programm -, Programm +, Lautstärke - (die Leuchtdiode blinkt zweimal).
Code-Suchlauf Wenn sie Ihre Hi-Fi-Anlage nicht mit der AUDIO ZAPPER fernbedienen können, nachdem Sie alle aufgelisteten Codes Ihrer Gerätemarke ausprobiert haben, versuchen Sie es mit dem Code-Suchlauf. Dies gilt auch für den Fall, daß Ihre Marke nicht in der Liste aufgeführt ist. Angenommen Ihren Verstärker/Tuner läßt sich nicht mit der AUDIO ZAPPER fernbedienen: 1 2 3 Schalten Sie Ihre Hi-Fi-Anlage ein. TUN MAGIC 4 5 6 Drücken Sie kurz die TUN-Taste der AUDIO ZAPPER.
Code-Suchlauf Zum Beispiel: Sie haben mit den Suchlauf einen Code gefunden mit dem Sie Ein-/Ausschalten und die Lautstärke bedienen können, aber nicht die vorprogrammierten Sender des Tuners anwählen können. Dann können Sie den Verstärker manuell im Tuner-Modus einstellen, und während der zweiten Suche zwischen TUN und Programm + hin- und herschalten, bis Sie die Funktion gefunden haben. Wichtig: - Wenn Sie ein Gerät bedienen möchten, drücken Sie erst die Gerätetaste (TUN, CD, TAPE oder MD).
Code-Suchlauf 3 Drücken Sie Programm -, Programm -, Programm +. 4 Für die erste Ziffer des sechsstelligen Code drücken Sie die Lautstärke + und zählen Sie, wie oft die rote Leuchtdiode aufleuchtet. 5 Für die zweite Ziffer, drücken Sie Lautstärke – und zählen Sie, wie oft die rote Leuchtdiode aufleuchtet. 6 Für die dritte Ziffer, drücken Sie Programm + und zählen Sie, wie oft die rote Leuchtdiode aufleuchtet.
Code-Beschreibung Auf den Seiten 62-71 sind die Codes Ihrer Geräte aufgelistet. Die gängigsten Codes jeder Marke stehen jeweils am Anfang. Tragen Sie die Codes Ihrer Geräte in die untenstehenden Kästchen und im Batteriefachdeckel ein, damit Sie diese bei Bedarf rasch nachschlagen können. Gerätetyp ______________________ ______________________ ______________________ ______________________ ______________________ WWW.ONEFORALL.
Zusätzliche Funktionen Gerätetasten neu belegen Mit der TUN-, CD- und MD-Gerätetaste können Sie Verstärker/Tuner-, Verstärker-, CD- und MD-Codes bedienen, deshalb ist es nicht notwendig die Gerätetasten neuzubelegen, es sei denn, daß Sie einen zweiten Audio-Kassettenspieler bedienen möchten. Sie können, z.B., die MD-Taste benutzen um Deck B Ihres Audio-Kassettenspielers zu bedienen.
Zusätzliche Funktionen Lernfähigkeit Die AUDIO ZAPPER hat eine Codebibliothek mit vorprogrammierten Codes. Nachdem Sie die AUDIO ZAPPER für Ihr Gerät programmiert haben, kann es sich herausstellen, daß einige Tasten, die Sie auf der Original-Fernbedienung hatten, nicht gleich funktionieren. Aber die AUDIO ZAPPER hat als extra eine spezielle Lernfähigkeit, die Ihnen ermöglicht jede Funktion Ihrer Original-Fernbedienung auf die AUDIO ZAPPER zu kopieren.
Zusätzliche Funktionen 5 Drücken Sie die Taste auf der AUDIO ZAPPER, auf der Sie die Funktion eingeben möchten (die Leuchtdiode wird sehr schnell blinken). 6 Drücken Sie die Taste auf der OriginalFernbedienung, deren Funktion Sie kopieren möchten, und halten Sie diese gedrückt bis die rote Leuchtdiode auf der AUDIO ZAPPER zweimal blinkt. 7 Wenn Sie andere Funktionen im gleichen Modus kopieren möchten, wiederholen Sie dann Schritte 5 und 6 und drücken Sie die nächste Taste die Sie eingeben möchten.
Zusätzliche Funktionen 2 Drücken Sie Programm-, Lautstärke-, Lautstärke(die Leuchtdiode wird zweimal blinken). 3 Drücken Sie die Gerätetaste, in dessen Modus die Funktion gelöscht werden soll. 4 Drücken Sie zweimal die Taste die gelöscht werden soll (die Leuchtdiode wird zweimal blinken).* 5 Wenn Sie mehrere Tasten löschen möchten, müssen Sie die Schritte 2-4 wiederholen. 6 Die originalen Funktionen der AUDIO ZAPPER funktionieren jetzt wieder.
Nützliche Hinweise Nützliche Hinweise Problem: Lösung: Die rote Leuchtdiode blinkt nicht wenn Sie eine Taste drücken? Tauschen Sie die Batterien durch zwei neue AAA-AlkaliBatterien aus. Die AUDIO ZAPPER Vergewissern Sie sich, reagiert nicht, wenn daß Sie neue Batterien Sie eine Taste drücken? verwenden und daß Sie die AUDIO ZAPPER auf Ihr Gerät richten. Die AUDIO ZAPPER bedient Ihr Gerät nicht? A) Probieren Sie alle für Ihr Gerät aufgelisteten Codes. B) Versuchen Sie den Code-Suchlauf.
Nützliche Hinweise Kundendienst Falls Sie noch Fragen zur Bedienung Ihrer neuen AUDIO ZAPPER -Universal-Fernbedienung haben, und noch keine Antwort auf der Seite: ”Nützliche Hinweise” gefunden haben, dann nehmen Sie bitte mit unseren Kundendienst Kontakt auf. Wir helfen Ihnen gern weiter. Besuchen Sie uns im Internet: www.oneforall.
F Table des Matieres A PROPOS DE VOTRE AUDIO ZAPPER 43 CARACTÉRISTIQUES ET FONCTIONS 45 INSTALLATION DES PILES 47 INSTALLATION DU ZAPPER AUDIO Installation directe Verrouillage/Déverrouillage d'une touche Accès direct aux sources (Touche F) Méthode de recherche Accès rapide aux codes 48 50 51 52 55 FONCTIONS AVANCÉES Changer les touches d’appareils Technologie d'apprentissage "Learning Feature" 56 56 CONSEILS UTILES 60 LISTE DES CODES 62 42 57 WWW.ONEFORALL.
A propos de votre AUDIO ZAPPER Nous vous remercions de la confiance que vous nous apportez en achetant la télécommande universelle AUDIO ZAPPER (URC-6540 ou URC6541). Votre lot comprend : •La Télécommande AUDIO ZAPPER •Le Mode d'emploi et la Liste des codes AUDIO ZAPPER Le Mode d'emploi & la Liste des Codes expliquent par étapes simples comment installer votre nouvelle télécommande universelle. Vous pouvez à l'avenir avoir encore besoin du mode d'emploi, aussi conservez-le précieusement.
A propos de votre AUDIO ZAPPER MAGIC Veille Touches d’appareils Chaîne +/ Track + Volume - Volume + Mute Chaîne -/ Track Touches de transport 44 WWW.ONEFORALL.
Caractéristiques et Fonctions Fonction: LED (Lampe témoin) Cette diode électroluminescente s'allume dès que vous appuyez sur une touche. Elle permet de confirmer également certaines programmations par un simple clignotement. MAGIC Touche Magic La touche Magic sert à installer votre AUDIO ZAPPER et à accéder aux fonctions spéciales. Touche Power (Veille) La touche Power vous permet d'allumer et d'éteindre votre Amplificateur/Tuner lorsque vous vous trouvez dans le mode TUN.
Caractéristiques et Fonctions Fonction Touches Volume +/-, Chaîne +/Les touches de Volume/ Chaîne commandent le niveau de volume de votre équipement Hi-Fi. Après avoir appuyé sur TUN, les touches de chaînes +/- vous permettent de changer les stations +/- préprogrammées de votre Tuner radio. Si vous appuyez d'abord sur Magic, ces touches chaînes +/- vous permettront alors d'effectuer une recherche +/- jusqu'à obtenir la prochaine station disponible de votre Tuner radio.
Caractéristiques et Fonctions Fonction fonctions traditionnelles d'avance et retour rapides. F Touche F (Touche de Fonction) La touche F vous permet de sélectionner l’entrée voulue de votre Amplificateur/Tuner. Même si votre télécommande d'origine utilise différentes touches pour chaque sortie (Tuner, CD, Tape, etc...), la seule touche F de votre AUDIO ZAPPER sélectionnera une sortie différente à chaque pression. Installation des Piles Votre AUDIO ZAPPER nécessite 2 nouvelles piles alcalines AAA/LR03.
Installation Directe Installation de votre Amplificateur/Tuner Les instructions suivantes vous permettent d'installer votre équipement audio, que ce soit un ensemble Micro, Mini ou à éléments séparés. Cherchez votre code HI-FI dans la rubrique Codes d'Installation (à partir de la page 62). Les codes sont listés par nom de marque. Le code le plus courant est listé en premier. Assurez-vous que votre appareil HI-FI soit bien allumé. 1 2 3 TUN MAGIC ______ Pressez puis relâchez la touche TUN.
Installation Directe Inscrivez les codes pour votre matériel HI-FI dans les cases de l`étiquette située dans le logement du compartiment des piles afin de pouvoir vous y référer facilement dans le futur. Exemple pour I’installation d’une mini-chaîne Pioneer Un seul code Amplificateur/Tuner 121312 programmé sur la touche TUN commande quatre des touches de fonctions (Power, Volume+, Volumeet F). Ces touches devraient être verrouillées selon les instructions de la page 50.
Verrouillage/Déverrouillage d’une touche Le Verrouillage vous permet de mémoriser une fonction à partir d`un code programmé. Les touches verrouillées restent en mémoire même si un autre code de base a été programmé sur la même touche d`appareil. Pour verrouiller une fonction : 1 2 TUN MAGIC Appuyez sur la touche d`appareil et relâchez.
Accès direct aux sources (Touche F) La touche F (Fonction) est conçue tout spéciale-ment pour sélectionner les sources directement de votre Amplificateur/Tuner. La formule Input Select Toggle vous permet d`utiliser la touche F (Fonction) afin de passer en revue les sources l`une après l`autre. Si la touche F ne parvient pas à changer la source : 1 MAGIC 2 Appuyez et laissez pressée la touche Magic jusqu`à ce que la lumière rouge clignote deux fois (la lumière va s`allumer puis clignoter deux fois).
Méthode de Recherche Au cas où votre équipement audio ne répondait pas à l`AUDIO ZAPPER après avoir essayé tous les codes de votre marque, vous pouvez essayer de trouver votre code en utilisant la méthode de recherche. Si votre marque n’est pas listée vous pouvez essayer la méthode de recherche. Pour chercher votre code Amplificateur/Tuner : 1 2 3 Allumez votre Amplificateur/Tuner. TUN MAGIC 4 5 6 Appuyez sur la touche TUN de votre AUDIO ZAPPER.
Méthode de Recherche Important: - Si vous voulez commander votre appareil, appuyez d`abord sur la touche désirée (TUN, CD, TAPE, ou MD). - Pour chercher le code de votre Lecteur de CD ou de Cassette Audio, suivez les mêmes instructions que celles mentionnées ci-dessus; seulement vous devez appuyer sur la touche CD ou TAPE durant l`étape 2 et alterner entre CD ou TAPE et la touche PLAY pendant l`opération de recherche.
Méthode de Recherche 6 Pour obtenir le troisième chiffre, appuyez sur Chaîne + et comptez le nombre de clignotements rouges. 7 Pour obtenir le quatrième chiffre, appuyez sur Chaîne - et comptez le nombre de clignotements rouges. 8 Pour obtenir le cinquième chiffre, appuyez sur MUTE et comptez le nombre de clignotements rouges. 9 Pour obtenir le sixième chiffre, appuyez sur PLAY et comptez le nombre de clignotements rouges. 10 Maintenant, vous avez votre code d`installation à 6 chiffres.
Accès rapide aux codes Les pages 62-71 comportent la liste de codes pour vos appareils. Les codes les plus courants pour chaque marque ont été listés en premier. Inscrivez les codes de vos appareils dans les cases ci-dessous et à l’interieur du compartiment des piles, pour une référence facile et rapide. Type d’appareil ______________________ ______________________ ______________________ ______________________ ______________________ WWW.ONEFORALL.
Fonctions Avancées Changer les Touches d’appareils Puisque toutes les touches TUN, CD et MD donnent accès aux codes Amplificateur/Tuner, Amplificateur, CD et MD, il est nécessaire de devoir réaffecter les touches d`appareil à moins que vous ne désiriez commander un deuxième Lecteur de Cassette Audio. Vous pouvez, par exemple, utiliser la touche MD pour pouvoir commander la platine B de votre Lecteur de Cassette Audio.
Fonctions Avancées Technologie d’apprentissage (Learning) L`AUDIO ZAPPER contient une librairie complète de codes préprogrammés. Après avoir installé votre AUDIO ZAPPER, il se peut que vous constatiez qu`une ou plusieurs touches de votre télécommande d`origine n`ait (ent) pas de place sur le clavier de l`AUDIO ZAPPER.
Fonctions Avancées 5 Appuyez sur la touche (de l`AUDIO ZAPPER ) sur laquelle vous voulez obtenir la copie de la fonction originale ( la lumière va clignoter rapidement). 6 Appuyez et maintenez la touche (de la télécommande d`origine) que vous désirez copier jusqu`à ce que la lumière de l`AUDIO ZAPPER clignote deux fois.
Fonctions Avancées 1 Appuyez et maintenez pressée la touche MAGIC jusqu` à ce que la lumière rouge clignote deux fois (elle s`allume une fois puis clignote deux fois). 2 Appuyez sur Chaîne -, Volume -, Volume (la lumière va clignoter deux fois). 3 Appuyez sur la touche d`appareil pour lequel la fonction doit être effacée. 4 Appuyez deux fois sur la touche apprise à effacer (la lumière va clignoter deux fois).* 5 Si vous souhaitez effacer une autre touche, répétez les étapes 2-4.
Conseils Utiles Conseils Utiles Problème : Solution: La lumière rouge ne s’allume pas lorsque vous appuyez sur une touche ? Remplacez les piles par 2 piles alcalines neuves de type AAA/LR03. L’AUDIO ZAPPER ne réagit pas lorsque vous appuyez sur une touche ? Vérifiez que vous utilisiez des piles neuves et que vous pointiez l’ AUDIO ZAPPER vers votre appareil. L’AUDIO ZAPPER ne parvient pas à faire fonctionner votre appareil ? A) Essayez tous les codes listés pour votre marque.
Numéro Vert d’assistance SERVICE CLIENTÈLE Si vous avez encore des questions sur le fonctionnement de la ONE FOR ALL et si vous n’arrivez pas à trouver la solution à vos problèmes dans ce manuel, vous pouvez vous mettre en contact avec notre service clientèle. Vous pouvez nous visiter sur Internet: www.oneforall.
Amplifier/Tuner Amplifier/Tuner Amplificateurs/Tuners Note: See also Misc. Audio codes (pg 71) for Amp/Tuner functions. Wichtig: Schauen Sie auch bei Diverse “Audio Codes auf Seite 71 für Amp/Tuner Functionen. Important: Pour certaines fonctions Amplificateur/ Tuner, veuillez vous référer aux codes Audio Divers (page 71).
4450211 DBX 4450217 Denon 133134 213131 131133 121212 4451233 Denver 133324 4450240 Dual 131111 4450263 Elta 134331 4450269 Eroica 111414 4450295 Ferguson 131214 4450305 Fisher 122331 111333 4450330 Garrard 121232 123431 134331 4450339 Genexxa 123134 4450347 Goldstar 111244 124244 4451224 Goldstar Scott 111244 4450349 Goodmans 123322 132212 134331 4450352 Graetz 141441 4450355 Grundig 213322 124322 121232 114234 4450357 GTX 112411 4450366 Harman Kardon 112343 4451084 Harwood 134331 4450381 Hitachi 114321 4
450487 M Electronic 4450500 Marantz 4450508 Matsui 4451242 MCS 4450520 Memorex 4450523 Meridian 4450528 Micromega 4450535 Mitsubishi 4450539 4450553 4450557 4451188 4450558 4450564 4451127 4451225 4450590 4450594 Modulaire NAD Naim Nakami Nakamichi NEC Nikkei NTDE Okano Onkyo 4450598 4451226 4450605 4450620 Optimus Orient Power Osaki Panasonic 4450634 Philco 4450636 Philips 4450641 Phonotrend 4450642 Pioneer 4450662 4450675 4450677 4450678 4451088 64 Proline Quad Quasar Quelle RadioShack 112411 2
4450691 4450693 4451137 4450698 4450701 RCA Realistic Renaissance Revox Roadstar 4450707 Rotel 4450714 Saba 4450720 Saisho 4450724 Samsung 4450727 Sansui 4450729 Sanyo 4450746 Schneider 4450750 4450762 4450763 4450764 Scott Sharp Sharp Optonica Sherwood 4450773 Siemens 4451244 Sonic 4450804 Sontec 4450805 Sony 4450809 Soundwave 4450838 4450845 4451144 4450849 4450854 Supertech T+A Taekwang Tandberg Teac 4450857 Technics 4450861 Techwood 4450871 Telefunken 4450896 Thorens 4450897 Thorn 4450905 Toshi
4450919 Uher 4450929 Universum 4451149 Venturer 4450939 Victor 4451245 Wharfedale 4450977 Yamaha 4450983 Yorx 4450987 Zenith 132441 113312 112411 131421 141412 121243 211114 112133 123431 113122 113433 114114 121232 131214 122233 141444 121232 114114 134331 132312 123431 122134 113144 122313 113411 112213 134331 CD/Mini-Disc Player CD/Mini-Disc Spieler Lecteurs CD/MINI-Discs 4440019 Aiwa 4440020 Akai 4440024 Alba 4441093 4440042 4440054 4440070 4441097 4440080 4440081 4440107 4440108 4440134 4440139 Al
4440240 Dual 113134 114121 4440249 Eclipse 132412 4441105 EEC 114113 4440256 Elektra 123132 4440265 Emerson 113321 4440295 Ferguson 121413 4440297 Fidelity 132412 4440305 Fisher 112231 122223 4440339 Genexxa 111111 114113 123422 121412 4440347 Goldstar 122444 133114 4440349 Goodmans 121412 113332 132132 132324 4440355 Grundig 113242 4440366 Harman Kardon 112341 123333 4440370 HCM 132412 4440377 Hinari 132431 4440378 Hiro 132412 4440381 Hitachi 121314 4440393 ICE 132431 4440406 Intersound 132122 4440415 ITT
4440526 4440528 4440534 4440535 4441077 4440553 4440557 4440558 4440577 4440580 4440594 4440620 MGA Micromega Mission Mitsubishi Musical Fidelity NAD Naim Nakamichi Nikko Nokia Onkyo Panasonic 4440636 Philips 4440642 4440667 4440675 4440686 4440693 4440698 4440701 4440707 4440714 4440717 4440724 4440727 Pioneer Proton Quad Radiotone Realistic Revox Roadstar Rotel Saba SAE Samsung Sansui 4440729 Sanyo 4440746 Schneider 4440750 Scott 4440762 Sharp 4440764 4440773 4440777 4440805 4440809 4440828 4440833 44
4440891 4440894 4440896 4440900 4440905 Tensai Thomson Thorens Tokai Toshiba 4440919 4440929 4441216 4440939 4440959 4440977 Uher Universum Ventura Victor Watson Yamaha 113424 113134 113242 113321 121334 124312 131211 133421 113332 113242 111341 131412 112131 132324 111321 113434 121122 142431 Cassette Kassetten Spieler Lecteurs Cassettes 4480019 Aiwa 111144 114122 121124 113221 4480020 Akai 113441 121341 123424 4480042 Amstrad 111222 4480054 Arcam 112141 4480092 Bang & Olufsen 114234 4480153 Carver 1
4480482 Luxman 4480487 4480492 4480500 4480520 4480535 4480553 4480558 M Electronic Magnavox Marantz Memorex Mitsubishi NAD Nakamichi 4480560 NAR 4481127 Nikkei 4480594 Onkyo 4480620 4480636 4480641 4480642 Panasonic Philips Phonotrend Pioneer 4480698 Revox 4480707 Rotel 4480724 Samsung 4480727 Sansui 4480729 4480746 4480762 4480764 4480773 Sanyo Schneider Sharp Sherwood Siemens 4480805 Sony 4480809 4481144 4480849 4480854 4480857 4480896 4480897 4480904 4480905 Soundwave Taekwang Tandberg Teac Tech
Miscellaneous Audio Diverse Audio Audio Divers 4460019 4460020 4460042 4460078 4460102 4460159 4460218 4460349 4460355 4460367 4460422 4460426 4460435 4460459 4460489 4460536 4460564 4460580 4460594 4460621 4460642 4460657 4460687 4460701 4460727 4460729 4460746 4460749 Aiwa Akai Amstrad Audio Source Behringer Celestion Denon Goodmans Grundig Harman Kardon Jerrold DCR JVC Kenwood Lexicon Macab Mitsubishi NEC Nokia Onkyo Panasonic BS Pioneer Pro-Sound Radix Roadstar Sansui Sanyo Schneider Scientific Atlanta
Guarantee UNIVERSAL ELECTRONICS INC./ONE FOR ALL warrants to the original purchaser that this product will be free from defects in materials and workmanship under normal use for a period of one (1)year from the date of the original purchase. Product will be replaced free of charge if it has been proven to be defective within the one (1) year period when said product is returned at customer expense within the warranty period.