UNIVERSAL REMOTE CONTROLS URC 6800 Cinema 6+ Manual Web Site : http://www.oneforall.
CONTENTS OVERVIEW OVERVIEW ............................................................................3 FEATURES AND FUNCTIONS ..............................................4 INSTALLING THE BATTERIES ..............................................8 SETTING UP YOUR COMPONENTS ....................................8 Programming the Cinema 6++ to operate your TV ............8 Setup Codes For TVs ....................................................9 Programming the Cinema 6++ to operate your VCR ......
FEATURES AND FUNCTIONS The illustration below and the chart on the next three pages describe the features and functions of the Cinema 6+ universal remote control. Use the drawing to locate each feature of the remote, then refer to the chart for a description of what function each feature performs. FEATURE - FUNCTION The Light (LED) flashes red to show that the remote is working and is sending a signal. The SETUP key is used to program your Cinema 6+.
The SLEEP key accesses the Sleep Timer of your home entertainment components (TV, CBL/SAT and RCVR modes only). Even if your component does not have a Sleep Timer, the Cinema 6+ may access its own built-in sleep timer. See page 28 for additional information. The REW (Rewind), PL (PLAY), FF (Fast Forward) REC (Record), STOP, and PAUSE keys operate the same as the transport keys on your original VCR, Laser Disc, DVD and CD Player remote.
POWER. The TV should turn off. If it does not respond, repeat steps 2-4, trying each code listed for your brand until you find the one that operates your TV. INSTALLING THE BATTERIES Your Cinema 6+ requires four (4) new AAA alkaline batteries. To install the batteries: 1. NOTE: If you have tried all the codes listed for your brand and your TV does not respond, try using the search method found on page 21. On the back of the Cinema 6+, pull back on the tab and lift the battery cover off. 5. 2.
Kloss KTV 0024 0030, 0180, 0185, 0032 TMK Toshiba 0056, 0177, 0178 0156, 0060, 0154 Setup Codes For TVs (continued) Setup Codes For TVs (continued) LG Logik Luxman LXI Magnasonic Magnavox Majestic Marantz Matsushita Megatron MEI Memorex MGA Midland Minutz Mitsubishi Motorola MTC Multitech NAD NEC Nikko NTC Onwa Optimus Optonica Orion Panasonic Penney Tosonic Totevision Vector Research Victor Vidikron Vidtech Viking Wards Philco Philips Pilot Pioneer Portland Prism Proscan Proton Pulsar Quasar RadioS
Broksonic Calix 0184, 0209, 0479, 0002, 0121 0037 RadioShack Radix 0000, 0037, 1037, 1062, 1162, 1262 0037 Setup Codes For VCRs (continued) Setup Codes For VCRs (continued) Canon Carver CCE Cineral Citizen Colt Craig Curtis Mathes Cybernex Daewoo Denon Dynatech Electrohome Electrophonic Emerex Emerson 0035 0081 0072, 0278 0278 0037, 0278 0072 0072, 0240, 0037, 0047, 0271 0035, 0041, 0060, 0202 0240 0278, 0045 0042 0000 0037 0037 0032 0209, 0184, 0479, 0278, 0000, 0002, 0036, 0037, 0043, 0068, 0121, 0
TV code 0451 for volume control. TV/VCR Combo. NOTE: If you have tried all the codes listed for your brand and your TV/VCR Combo does not respond, try using the search method found on page 21. 5. Your Cinema 6+ is now programmed to operate your TV/VCR Combo. Write your TV/VCR Combo code in the boxes to the left for future reference. Remember, to use your Cinema 6+ to operate your TV/VCR Combo, press the VCR key first.
Pioneer Sony 0059 0193, 0201 Onkyo Optimus Panasonic Programming the Cinema 6+ to operate your Receiver/Tuner: Locate the brand name of your Receiver/Tuner in the “Setup Codes For Receiver/Tuners” section (starting below page), and write it in below. Receiver/Tuner Brand: ______________________ The brands are listed in alphabetical order with the most popular codes listed first. You will use one of these codes to program your Cinema 6+ to operate your Receiver/Tuner as follows: 1.
Remember, if you want to use your Cinema 6+ to operate your CD Player, press the CD key first. gram your Cinema 6+ to operate your Cable Converter or Satellite Receiver as follows: Setup Codes For CD Players 1. Turn on your Cable Converter or Satellite Receiver. 2. Press CBL/SAT and release. Press and hold SETUP until the Cinema 6+’s red light blinks twice, then release SETUP. 3. Enter the first four-digit Cable Converter or Satellite Receiver code listed.
Magnavox Memorex Movie Time Novaplex 0027, 0014 0000 0063, 0156 0618 Toshiba DBS Uniden DBS Zenith SEARCHING FOR YOUR CODE Setup Codes for Cable Converters (continued) NSC Oak Optimus Panasonic Panther Paragon Philips Pioneer Popular Mechanics Prelude Pulsar RadioShack RCA Realistic Recoton Regal Regency Rembrandt Runco Samsung Scientific Atlanta Seam Signal Signature SL Marx Sprucer Starcom Stargate Starquest Sylvania Tandy Teleview Texscan TFC Timeless Tocom Toshiba Tusa TV86 Unika United Artists Unit
If the light does not blink when you press the number 2, the digit is zero. 5. 6. For the third digit, press 3 and count the number of times the red light (LED) blinks on the Cinema 6+. If the light does not blink when you press the number 3, the digit is zero. For the fourth and final digit, press 4 and count the number of times the red light (LED) blinks on the Cinema 6+. If the light does not blink when you press the number 4, the digit is zero. Now you have your four-digit code.
correctly, the red light will blink twice when you enter the final digit of your code. 4. 5. Aim the Cinema 6+ at your Cassette Player and press PL (Play). Your unit should play the tape. If it does not respond, repeat steps 2-4, trying each code listed for your brand until you find the one that works. Your Cinema 6+ is now programmed to operate your Cassette Player. Remember, if you want to use your Cinema 6+ to operate your Cassette Player, press the VCR key first.
CD to RCVR SETUP* - 992 - RCVR - CD - CD - SETUP* - Audio code CD to CBL/SAT SETUP* - 992 - CBL/SAT - CD - CD - SETUP* Cable/DBS code CBL/SAT to TV SETUP* - 992 - TV - CBL/SAT - CBL/SAT SETUP* - TV code CBL/SAT to VCR SETUP* - 992 - VCR - CBL/SAT - CBL/SAT SETUP* - VCR code CBL/SAT to DVD/LD SETUP* - 992 - DVD/LD - CBL/SAT - CBL/SAT SETUP* - DVD or LD code CBL/SAT to RCVR SETUP* - 992 - RCVR - CBL/SAT - CBL/SAT SETUP* - Audio code CBL/SAT to CD SETUP* - 992 - CD - CBL/SAT - CBL/SAT SETUP* - CD Player
TROUBLE SHOOTING Problem Solution Red light does not blink when you press a key? Replace the batteries with four (4) new AAA alkaline batteries. The SLEEP key allows you to access the sleep timer of your TV, Cable Converter/DBS Satellite or Audio component. You can access your TV, Cable Converter, DBS Satellite or Audio component’s Sleep Timer by pressing the SLEEP key.
TROUBLE SHOOTING (continued) Problem Solution Surround on Sony receiver will not turn on? Sony receiver will turn off but not back on? Press RCVR once. Press and hold SETUP until red light blinks twice, then release. Enter 9 - 9 - 4 and press SETUP once. Enter 3 - 9 - 8 and press SURROUND. Red light should blink twice. Surround should operate now. Try using the number pad on the Cinema 6 to turn the receiver back on.
Copyright 1999 by Universal Electronics Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in any retrieval system, or translated to any language, in any form or by any means, electronic, mechanical, magnetic, optical, manual, or otherwise, without the prior written permission of Universal Electronics Inc. One For All and Cinema 6 are trademarks of Universal Electronics Inc. One For All is designed for compatibility in North America excluding Mexico.
