URC-7510 R UK V TTV Universal remote . . . . . . . . . . . . . . . . . . . . . . . . . . P.
UK Table of Contents PICTURE OF ONE FOR ALL REMOTE 3 THE KEYPAD 4 INSTALLATION Set-Up using the barcode reader Set-Up by barcode number The Search Method Blinking back your SET-UP CODE 6 7 8 8 ADVANCED FEATURES Colour, Brightness and Contrast Auto Scan Sleeptimer ONE FOR ALL Sleeptimer ONE FOR ALL Recall (Previous Channel) Key Magic 9 9 9 10 10 11 TROUBLE SHOOTING Helpful Hints Customer Service 11 12 Installing the Batteries Your ONE FOR ALL needs 2 new “AA/LR6” alkaline batteries. 1.
1 3 2 4 5 8/9 11 6/7 10 12 13 14 WWW.ONEFORALL.
The Keypad See picture of ONE FOR ALL remote on page 3 1 LED The LED (Light Emitting Diode) will flash red when a key is pressed to show the remote is working. 2 MAGIC Key The MAGIC key is used to set up your ONE FOR ALL and to access special functions. 3 MENU Key Controls the same function as it did on your original remote. 4 POWER Key Controls the same function as it did on your original remote. 5 Number Keys The Number keys (0-9, 10, AV(20)) provide functions just like your original remote.
MIX: Shows teletext and regular television simultaneously. You may also use this key for subtitling. On some televisions this function is accessed by pressing the text key twice. UPDATE: Goes to regular TV mode while searching for the text page. The function will be exactly as on your original remote control. i INDEX: Gives teletext index if available on your orginal remote. 13 16:9 Key The 16:9 key allows you to have wide screen view (if available on your original remote).
Installation Before you start, please read these instructions carefully Set-Up using the barcode reader In order to operate your television, you will need to locate the correct SET-UP CODE (Every brand’s barcode represents multiple SET-UP CODES, sometimes up to 25). So please be patient. Using the barcode reader is a quick and easy way of testing all the SET-UP CODES that are suitable for your brand of TV. Please note this is your barcode reader lens.
6 Point the ONE FOR ALL TV remote towards your television and press (POWER) to see if your television switches off. If your television switched off, press . If your television does NOT switch off, slowly press the Number keys starting from 1 upwards (every digit you press will send the POWER function from a different SET-UP CODE). Press ,if the TV switches off, press Press ,if the TV switches off, press Etc...
The Search Method If your television does not respond to the ONE FOR ALL TV remote after you have tried the Set-Up method on pages 6 and 7, try searching for your SET-UP CODE. The Search Method may also work if your brand is not listed at all. You can find your “Search method barcode” on page 37 in the barcode list. To search for your television SET-UP CODE: 1 Make sure that your television is switched on (not in standby).
Advanced Features Colour, Brightness and Contrast Depending on the functions of your original remote control, the ONE FOR ALL may operate the colour, brightness and contrast settings of your television.
The ONE FOR ALL Sleeptimer If your television does not have a sleeptimer function built in, you can install the ONE FOR ALL sleeptimer function. To do so: 1 Press and hold MAGIC until the red light blinks twice. 2 Press 9 7 0. The red light will blink twice again. It is only necessary to perform steps 1 and 2 once. To set the timer, continue with the steps below. To deactivate the ONE FOR ALL sleeptimer, repeat step 1 and 2 above.
Key Magic® Key Magic is an exclusive ONE FOR ALL feature. This feature ensures that many functions of your original remote control can be operated. Often used functions can be assigned to a key of your choice using the Key Magic feature of your ONE FOR ALL TV remote.
Customer Service If you still have questions about the operation of your ONE FOR ALL TV remote and you could not find the answer(s) in the trouble shootingsection, you may want to contact the customer service department for assistance. You may care to visit our internet-site: www.oneforall.
Guarantee UK UNIVERSAL ELECTRONICS INC./ONE FOR ALL warrants to the original purchaser that this product will be free from defects in materials and workmanship under normal and correct use for a period of one (1) year from the date of original purchase. This product will be replaced free of charge if it has been proven to be defective within the one (1) year warranty period.
