User's Manual

7. STAY ALERT. Watch what you are doing at all times. Use common sense. Do
not use this product when you are tired or distracted from the job at hand.
8. CHECK FOR DAMAGED PARTS. Before using this product, carefully check that
it will operate properly and perform its intended function. Check for damaged
parts and any other conditions that may affect the operation of this product.
Replace or repair damaged or worn parts immediately.
9. REPLACEMENT PARTS AND ACCESSORIES: When servicing, use only
identical replacement parts. Only use accessories intended for use with this
product. Approved accessories are available from Harbor Freight Tools.
10. MAINTAIN THIS PRODUCT WITH CARE. Keep this product clean for better and
safer performance.
11. MAINTENANCE: For your safety, service and maintenance should be performed
regularly by a qualified technician.
12. USE THE RIGHT TOOL FOR THE JOB. Do not attempt to force a small tool or
attachment to do the work of a larger industrial tool. There are certain
applications for which this tool was designed. It will do the job better and more
safely at the rate for which it was intended. Do not modify this tool, and do not
use this tool for a purpose for which it was not intended.
13. WARNING: The warnings, precautions, and instructions discussed in this manual
cannot cover all possible conditions and situations that may occur. The operator
must understand that common sense and caution are factors, which cannot be
built into this product, but must be supplied by the operator.
SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
1. CAUTION: FOR PERSONAL SAFETY, IT IS RECOMMENDED THAT ONLY A
QUALIFIED, CERTIFIED ELECTRICIAN INSTALL THE FENCE CONTROL.
2. MAINTAIN A SAFE WORKING ENVIRONMENT. Keep the work area well lit.
Make sure there is adequate surrounding workspace. Always keep the work area
free of obstructions, grease, oil, trash, and other debris. Do not use the Fence
Control in areas near flammable chemicals, dusts, and vapors.
3. THIS PRODUCT MUST BE GROUNDED. If for any reason the Fence Control
should malfunction, grounding reduces the risk of accidental electrical shock. A
properly installed ground rod (not provided) electrically connected to the Fence
Control ground terminal provides the necessary grounding of this product.
(See Figure B.)
SKU 47454 PAGE 3
REV 07g