User's Manual

UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 11
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
INSTALLATION INSTRUCTIONS
NOTE: For additional references to the parts listed below, refer to the Assembly
Diagram on page 11.
To Mount The Fence Control On A Horizontal Or Vertical Surface:
1. CAUTION: Prior to mounting the Fence Control, make sure its Power Switch
(part #5) is in the “OFF” position. (See Figure C, and Assy. Diagram.)
2. To mount the Fence Control onto a wood surface, place the Fence Control
against the desired location on the wood surface. Use the two mounting holes
located at the top of the Main Body (part #4) as a template with which to mark
two holes to be drilled into the wood surface. Set aside the Fence Control, and
drill the two holes in the wood surface. Then, use two wood screws (not
provided) of appropriate diameter and length to secure the Fence Control to the
wood surface. (See Figure A, and Assy. Diagram.)
3. To mount the Fence Control to a metal surface, place the Fence Control against
the desired location on the metal surface. Use the two mounting holes located
at the top of the Main Body (part #4) as a template with which to mark two holes
to be drilled all the way through the metal surface. Set aside the Fence Control,
and drill the two holes through the metal surface. Then, use two machine bolts of
appropriate diameter and length, two lock washers, and two nuts (not provided)
to secure the Fence Control to the metal surface.
(See Figure A, and Assy. Diagram.)
To Properly Ground The Fence Control:
1. CAUTION: Prior to grounding the Fence Control, make sure its Power Switch
(part #5) is in the “OFF” position. (See Figure C, and Assy. Diagram.)
2. A Ground Rod (not provided) is required to properly ground the Fence Control.
A Ground Rod should be made of copper, galvanized pipe, or a steel rod driven
approximately six to eight feet into the ground as near to the Fence Control as
possible.
SKU 47454 PAGE 5