User's Manual

Hook the accessory to the top of the garage door opener and
insert it into the accessory port. Ensure the bottom latch on the
accessory is secured to the port on the garage door opener.
NOTE: DC accessories will not receive power unless the acces-
sory port has been activated. See Activating/Deactivating DC
Accessory Ports later in this manual.
Depress latch to release and remove the accessory.
OPERATION
WARNING:
Always deactivate accessory ports when you are assembling parts,
making adjustments, cleaning, or when not in use. Deactivating
accessory ports will prevent accidental starting that could cause
serious personal injury.
ACTIVATING/DEACTIVATING DC ACCESSORY
PORTS
See Figure 3.
It is recommended to install the security camera accessory in port #7
to face the garage door and into the drive once the door is opened.
The security camera accessory will, however, operate in any of the
ports on the RYOBI Garage Door Opener.
To activate a DC accessory port, press the number on the indoor
keypad (not included) corresponding with the desired port. For
example, to activate accessory port #7 press NUMBER 7 on your
keypad.
NOTE: Multiple ports can be activated at once.
To deactivate a DC accessory port, press the number on the indoor
keypad (not included) corresponding with the port.
STARTING/STOPPING THE SECURITY CAMERA
ACCESSORY
See Figure 3.
Install the accessory and activate the appropriate accessory port
by pressing the corresponding number on the keypad.
NOTE: For quick identification, the supplied icon label can be
placed over the keypad number.
After the accessory port is activated, the images from the security
camera accessory can be viewed with the RYOBI GDO System
app available from Google Play or the App Store.
A solid red LED indicates power to the accessory.
The pairing process begins automatically and the LED indicator
flashes blue.
Flashing stops and the LED is solid blue once the accessory is
connected to the server. The accessory is now ready to connect
to your home wi-fi through the app on your smartphone (not in-
cluded).
NOTE: A flashing red LED indicates a Wi-Fi connection failure.
Press the Wi-Fi button to restart the connection process.
ADJUSTING THE LENS
See Figure 4
The security camera lens adjusts in two different ways. Manually
rotate the outer ring left to right or raise and lower the center lens, as
shown, to achieve the desired viewing area.
MICRO SD CARD FOR STORAGE
See Figure 5
The included MicroSD card can store pictures or videos captured by
the security camera accessory.
To install:
Insert card into the slot as shown and press and release to lock
into place.
To remove:
Press card to release and remove from slot.
This product has a Three-Year Limited Warranty. For Warranty
details go to www.ryobitools.com
WARNING:
To reduce the risk of injury, do not attempt to use this product until
you have read thoroughly and understand completely this opera-
tor’s manual and the operator’s manual for the GD200 garage door
opener. Ensure compatibility and fit before using this accessory.
Do not use this accessory if a part is damaged or missing.
Do not overreach. Keep proper footing and balance at all times.
Proper footing and balance enable better control of the accessory
in unexpected situations.
Do not use the accessory if the indoor keypad or smartphone app
does not turn it on or off. A accessory that cannot be controlled
with the keypad or app is dangerous and must be repaired.
Deactivate accessory ports before making adjustments, cleaning,
or changing accessories. Such preventive safety measures reduce
the risk of starting the accessory accidentally.
Keep the accessory dry, clean and free from oil and grease. Always
use a clean cloth when cleaning. Never use brake fluids, gasoline,
petroleum-based products, or any strong solvents to clean your
accessory. Following this rule will reduce the risk of loss of control
and deterioration of the enclosure plastic.
Clean only with dry cloth.
Do not operate near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
Save these instructions. Refer to them frequently and use them
to instruct others who may use this tool. If you loan someone this
tool, loan them these instructions also to prevent misuse of the
product and possible injury.
CALIFORNIA PROPOSITION 65
WARNING:
This product may contain chemicals, including lead, known to
the State of California to cause cancer, birth defects or other
reproductive harm. Wash hands after handling.
PACKING LIST
Security Camera Accessory, Antenna, Icon Label, and Operator’s
Manual.
WARNING:
Ensure accessories are properly and securely connected to their
port on the garage door opener. Failure to properly secure the
accessory can cause it to fall and could result in serious personal
injury or property damage.
WARNING:
Use extreme care if you need to stand on a ladder to install or
adjust this accessory. Ensure someone is holding the ladder on the
ground to keep it stable. Failure to safely use a ladder can cause
a fall and result in death or serious personal injury.
INSTALLING THE ANTENNA
See Figure 1
Locate the antenna inside the package and connect to the accessory
as shown.
INSTALLING/REMOVING THE SECURITY CAMERA
ACCESSORY
See Figure 2.
Assemble and mount the garage door opener as described in the
garage door opener manual.
Connect the garage door opener to an AC power supply.
Select one of the seven DC accessory ports to power your
accessory.
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
SECURITY CAMERA ACCESSORY
FOR GD200 GARAGE DOOR
OPENER
ACCESSOIRE DE SECURITY CAMERA
POUR OUVRE-PORTE
DE GARAGE GD200
ACCESORIO DE SECURITY
CAMERA PARA
EL SISTEMA DE APERTURA
PARA PORTÓN
DE GARAJE GD200
GDM610
A - Accessory Port #7 (prise du module #7, puerto del módulo #7)
B - Latch (loquet, pestillo)
C - Security Camera Accessory (module de security camera, módulo de security camera)
D - Hooks (crochets, ganchos)
A - Indoor keypad (clavier de l’intérieur, panel en el interior)
B - Icon label (étiquette d’icône, etiqueta del ícono)
C - Number 7 (numéro 7, número 7)
D - Module Port #7 (prise du module #7, puerto del módulo #7)
SAFETY RULES FOR SECURITY CAMERA
ASSEMBLY
FIG. 2
FIG. 3
A
B
A
C
D
B
C
D
The following signal words and meanings are intended to explain the levels
of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER:
Indicates an imminently hazardous
situation, which, if not avoided, will
result in death or serious injury.
WARNING:
Indicates a potentially hazardous situa-
tion, which, if not avoided, could result
in death or serious injury.
CAUTION:
Indicates a potentially hazardous situ-
ation, which, if not avoided, may result
in minor or moderate injury.
NOTICE:
(Without Safety Alert Symbol) Indicates
important information not related to an
injury hazard, such as a situation that
may result in property damage.
SYMBOLS
Some of the following symbols may be used on this product. Please study
them and learn their meaning. Proper interpretation of these symbols will
allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
Safety Alert
Indicates a potential personal
injury hazard.
Read Operator’s
Manual
To reduce the risk of injury,
user must read and understand
operator’s manual before using
this product.
Electrocution/
Electric Shock
Do not touch electrical connec-
tions, do not install with wet
hands, and keep module away
from water to reduce the risk of
electrocution or electric shock.
ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road, Anderson, SC 29625 • Phone [phone]
États-Unis, Téléphone 1-877-205-5714 • USA, Teléfono 1-877-205-5714
www.ryobitools.com
995000147
11-8-16 (REV:01)
FIG. 1
FIG. 4 FIG. 5