Operation Manual

19
Troubleshooting
Problem Possible Cause Solution
Noise or sound dis-
torted on AM or FM
Station not tuned properly. Retune the broadcast station.
FM Wire antenna is not extended. FM: Extend the FM Wire antenna
AM or FM no sound Unit not in “RADIO” function mode. Slide FUNCTION SELECTOR to RADIO.
Volume set at minimum Increase Volume.
CD player will not
play
Unit not in CD function mode. Select CD function mode.
CD is not loaded properly. Load CD with label side up.
ICD is self-compiled, the media used
may not be compatible with the player.
Use better quality blank media and
retest.
CD skips Disc is dirty or scratched. Wipe CD with clean cloth
Intermittent sound
from CD player
Dirty or defective disc Clean or replace the defective disc
Dirty pick up lens Use a CD lens cleaning disc to clean
Player is subject to excessive shock
or vibration
Relocate the player away
Sound appears
distorted at high
volume levels.
Volume control is set to maximum. Adjust Volume Control to a lower
comfortable level.
BT can not connect. The System’s memory is full hold PLAY/PAUSE Button two seconds
to clean the memory
No Alarm Alarm is not activated
Check that Alarm indicator “
”
appears in the Display.
Incorrect Alarm time Make sure AM or PM is set correctly.