Operation Manual
20
Wall Mounting
Use the supplied pattern, to mount the device to a wall. Please note, the device weights about
2.5 kgs. Make sure the wall is stable enough to hold the weigth. Ask a qualied person for aide,
when in doubt.
Screws are not supplied. Use screws that have about the depicted dimensions:
• Fix the pattern paper to the wall in horizontal position.
• Drill according to the screw point marks on the pattern paper.
• Fix a wall mount plug into the hole using a hammer, until it is ush with the wall surface
• Fasten the screws to the wall, so that there is a 4 mm gap between the screw heads and
the wall surface.
• Hang the unit onto the screws: