Operation Manual

Sleep operation (Remote control only)

This function allows you to program the system to switch o itself after a set period of time.

You can set your sleep time in power on mode:

• To activate the sleep function, press the SLEEP button on the remote, the display will show

“Sleep Timer-OFF, 90, 80, 70, 60, 50, 40, 30, 20, 10” and ash.

• When the display shows your desired sleep time, release the button, the sleep timer is

now activated. The display will show “SL10” is to indicate “10 minutes” sleep time and so

on. When the sleep time counts to zero, the unit will go o.

• To cancel sleep, press the SLEEP button once again, the sleep function will turn o.

(10027562 + 10027563)

BT wireless technology is a short-range radio technology that enables wireless communication

between various types of digital devices, such as mobile phone or computer. It operates within

a range of about 10 meters. This unit supports BT version 2.1 + EDR Prole: A2DP / AVRCP

Pairing with BT devices:

• Press the ON/STAND-BY button to turn the power on.

• Press the SOURCE button (remote control) to select BT function. (PAIRING indicator ashes).

• Perform pairing procedure on the source device to detect this unit. “oneConcept-V13” will

appear in the detected devices list (if available) in the source device. (Refer the source

device operating manual for details).

Notes:

• Place the devices to be paired within 1 meter (3 feet) of each other when pairing.

• Select “oneConcept-V13” from the source list. If Passcode* is required, enter “0000”.*

Passcode may be called PIN Code, Passkey, PIN number or Password.

• Pairing indicator (blue) will stop blinking once the unit is successfully paired with the sour-

ce device.(Pairing information is now memorized in the unit.) Some audio source devices

may connect with the unit automatically after pairing is completed, otherwise follow the

instructions in the source device operating manual to start connection