Users Manual
10
FCC Note:
Caution: Changes or modications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.
RF Exposure Information (SAR)
This device is designed and manufactured not to exceed the emission limits for exposure
to radio frequency (RF) energy set by the Federal Communications Commission of the
United States.
During SAR testing, this device was set to transmit at its highest certied power level in
all tested frequency bands, and placed in positions that simulate RF exposure in usage
against the head with no separation, and near the body with the distance of 15 mm.
Although the SAR is determined at the highest certied power level, the actual SAR level
of the device while operating can be well below the maximum value. This is because
the device is designed to operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a wireless base station
antenna, the lower the power output.
The exposure standard for wireless devices employing a unit of measurement is known
as the Specic Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg.
This device is complies with SAR for general population /uncontrolled exposure limits
in ANSI/IEEE C95.1-1992 and has been tested in accordance with the measurement
methods and procedures specied in IEEE1528.
The FCC has granted an Equipment Authorization for this model device with all
reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.
SAR information on this model device is on le with the FCC and can be found under the
Display Grant section of www.fcc.gov/oet/ea/fccid after searching on
FCC ID: 2ABZ2-EE143
For this device, the highest reported SAR value for usage against the head is 0.95W/kg,
for usage near the body is 0.99W/kg.
While there may be differences between the SAR levels of various phones and at various
positions, they all meet the government requirements.
SAR compliance for body-worn operation is based on a separation distance of 15 mm
between the unit and the human body. Carry this device at least 15 mm away from
your body to ensure RF exposure level compliant or lower to the reported level. To
support body-worn operations, choose a belt clip or case that does not contain metallic
components, to maintain a separation of 15 mm between this device and your body.
RF exposure compliance with any body-worn accessory, which contains metal, was not
tested and certied, and use such body-worn accessory should be avoided.
Hearing Aid Compatibility (HAC) regulations for Mobile phones
Your phone is compliant with the FCC Hearing Aid Compatibility requirements.
The FCC has adopted HAC rules for digital wireless phones. These rules require certain
phone to be tested and rated under the American National Standard Institute (ANSI)
C63.19-2011 hearing aid compatibility standards. The ANSI standard for hearing aid
compatibility contains two types of ratings:
M-Ratings: Rating for less radio frequency interference to enable acoustic coupling with
hearing aids.
T-Ratings: Rating for inductive coupling with hearing aids in telecoil mode.
Not all phones have been rated. A phone is considered hearing aid compatible under
FCC rules if it is rated M3 or M4 for acoustic coupling and T3 or T4 for inductive
coupling. These ratings are given on a scale from one to four, where four is the most
compatible. Your phone meets the M3/T3 level rating.
However, hearing aid compatibility ratings don't guarantee that interference to your
hearing aids won't happen. Results will vary, depending on the level of immunity of
your hearing device and the degree of your hearing loss. If your hearing device happens
to be vulnerable to interference, you may not be able to use a rated phone successfully.
Trying out the phone with your hearing device is the best way to evaluate it for your
personal needs.
This phone has been tested and rated for use with hearing aids for some of the wireless
technologies that it uses. However, there may be some newer wireless technologies
used in this phone that have not been tested yet for use with hearing aids. It is important
to try the different features of this phone thoroughly and in different locations, using
your hearing aid or cochlear implant, to determine if you hear any interfering noise.
Consult your service provider or the manufacturer of this phone for information on
hearing aid compatibility. If you have questions about return or exchange policies,
consult your service provider or phone retailer.
Hearing devices may also be rated. Your hearing device manufacturer or hearing health
professional may help you nd this rating. For more information about FCC Hearing Aid
Compatibility, please go to http://www.fcc.gov/cgb/dro.
Regulatory
Setting---About phone---Regulatory