Hardware Manual

onesc re e nso lu t i ons. c om | +1 858.552.0290 | U n i t ed S t ate s| Pa k i st an | Colom bi a | Mexico | UA E
12
6. Setting Up Your Unit!
6.1. OneScreen Touchscreen
OneScreen Hubware, Canvas and Touchscreen come with perpetual licenses of OneScreen Annotate &
Eshare and the first year subscriptions of OneScreen Hype and OneScreen Swap. If you are not using OPS
PC you will have to install these software on your external PC. Please contact us for the digital copy of the
software and license. To connect an external PC to the Touchscreen please follow the steps mentioned
below.
6.1.1. Connecting an External PC
To connect an external PC, please use the HDMI or VGA cable and the USB touch cable (as shown in What’s
Included).
Connect one end of the HDMI or VGA cable to your laptop and the other end to one of the corresponding
ports on OneScreen Touchscreen. If you are connecting the VGA cable, please also use the AUX cable to
transfer audio.
Connect the standard USB end of the USB Touch Cable to your laptop and the other end to the port shown
below on OneScreen Touchscreen. Please note that the USB Touch cable should be connected to USB Touch
Port A when connecting the PC via HDMI cable and with USB Touch Port B when connecting the PC via VGA
cable.
Note: Red lines indicate connections using VGA, AUX and Touch USB cables. Black lines indicate connections
using HDMI and Touch USB cables.