User Manual

Table Of Contents

,strap tnemecalper rof stseuqer ,smialc no ecivres tsetsaf roF

www.comfortproducts.net/support

e-mail: customerservice@comfortproducts.net

Keep your sales receipt as documentation of your ownership.

CUSTOMER SERVICE

:ta etisbew ruo tisiv esaelp ,snoitseuq ro

ASSEMBLY INSTRUCTIONS

MODEL 50-JN22ET

SUPPLIER CODE: JNFF

INDUSTRIAL END TABLE, INSET BLACK METAL

PAGE 1
ASSEMBLY INSTRUCTIONS MODEL 50-JN22ET SUPPLIER CODE: JNFF INDUSTRIAL END TABLE, INSET BLACK METAL CUSTOMER SERVICE For fastest service on claims, requests for replacement parts, or questions, please visit our website at: www.comfortproducts.net/support e-mail: customerservice@comfortproducts.net Keep your sales receipt as documentation of your ownership.
PAGE 2
PARTS LIST Please look for part indicator on the side of the part. It is either stamped or on a labled sticker.
PAGE 3
ASSEMLBY Attach Rails (C) to the Legs (D) using the four 6x35mm Screws.
PAGE 4
Leg assembly using twelve 6x30mm Screws and Washers (Note: Washers go between the Rails and the Tabletop pieces). TIP: Start with the outermost screws on each rail. Once those are in place, work your way inwards. This will help align the rest of the screws.
PAGE 5
Screw in the Feet (2). Then attach the Shelf (E) using eight 6x30mm Screws (1). TIP: It may be easier to attach the shelf with the table right side up. Turn the table right side up.
PAGE 6
• • • • DO NOT stand on the table. Do not use the table as a stepladder. table Every 6 months, check all bolts and screws to ensure they are tight. This products is California 93120 Compliant for Formaldehyde. PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year.