User Manual

ManualsBrandsOneSpace ManualsFurnitureNorwood Range TV Stand Entertainment Center, Wood & Black Metal

Table Of Contents

,strap tnemecalper rof stseuqer ,smialc no ecivres tsetsaf roF

www.comfortproducts.net/support

e-mail: customerservice@comfortproducts.net

Keep your sales receipt as documentation of your ownership.

CUSTOMER SERVICE

:ta etisbew ruo tisiv esaelp ,snoitseuq ro

ASSEMBLY INSTRUCTIONS

MODEL 50-JN23TV

SUPPLIER CODE: JNFF

RUSTIC INDUSTRIAL LOCKER TV STAND

Summary of content (9 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS MODEL 50-JN23TV SUPPLIER CODE: JNFF RUSTIC INDUSTRIAL LOCKER TV STAND CUSTOMER SERVICE For fastest service on claims, requests for replacement parts, or questions, please visit our website at: www.comfortproducts.net/support e-mail: customerservice@comfortproducts.net Keep your sales receipt as documentation of your ownership.
PAGE 2
PARTS LIST Please look for part indicator on the side of the part. It is either stamped or on a labeled sticker.
PAGE 3
HARDWARE KIT Stock # 51-JN23TVHA 1 2 Minifix Bolt Peg x16 3 x18 4 7x50mm Screw Minifix Lock x16 5 x4 6 Washer Door Pin x8 7 x2 8 4x18mm Screw Door Handle x4 9 x2 10 Door Magnet 3x14mm Screw x2 How to use the minifix bolt and lock system: x4
PAGE 4
ASSEMBLY 1 Start by inserting Pegs into all the following wood pieces:
PAGE 5
2 Attach the Door Magnets (9) to the Tabletop (A) using two 3x14mm Screws (10) each. 10 10 9 9 3 Mount the Floor Trim (K) to the Floor (J) use minifix bolts (1) and locks (3). 4 Attach the Door Handles (8) to the Doors using 4x18mm Screws (7).
PAGE 6
5 Attach the Floor (J) to the Left Wall and Right Wall using Minifix Bolts (1) and Locks (3) as shown. You will screw three bolts into each wall. (This step is shown upside down). J 6 Attach the Left Inner Wall (D) and Right Inner Wall (C) to the Floor (J) using the pre-inserted Pegs and the 7x50mm Screws. The insert the Backboard (F).
PAGE 7
Door Pins (5). (NOTE: Use a washer (6) with the bottom Door Pins.) Lastly, insert two door pins in each Inner Wall, at the level of your choice.
PAGE 8
WEIGHT CAPACITY 110 LBS
PAGE 9
• • • • DO NOT stand on the table. Do not use the table as a stepladder. table Every 6 months, check all bolts and screws to ensure they are tight. This products is California 93120 Compliant for Formaldehyde. PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year.