Motorized Treadmill Owner’s Manual This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Safety Instructions Warning: Now here we suggest that you should consult with your physician or health professional before starting your workout, especially for the age up to 35 old or once-health problem people. We take no responsible for any troubles or hurts if you don’t following our specification. Treadmill will be carefully assembled and covered the motor shield, then connect to the power. Attention 1.Ensuring the safety clamps were attached to the clothing or belts before using the treadmill. 2.
holes, these may cause fire or people may be hurt by the power. 14.Cut off the power when the equipment is not used. When the power is cut off , do not pull the power line to keep the wire unbroken. Insert the plug to the socket with the safety ground circuit, for the power-line is professional equipment .You must contact with the professional people directly while the line is damaged. 15.This Treadmill only for home-using. 16.Warning: incorrect or excessive exercise could lead to harm. 17.
Assembly Instructions When you open the carton, and you will find the below parts in the carton. Ⅱ Ⅲ Ⅰ Ⅳ Ⅴ Ⅵ user manual No DES.
This product is free of assembly, open the box, remove the treadmill, connected to the power can be used. Step 1: Open the carton, get out the above spare parts, and put the Main Frame onto the level ground. Step 2: Plug in the treadmill and turn on the power, put the safety key on the treadmill, you could start to use treadmill. ATTENTION : Do the following operation after checking everything is OK. Before you use the treadmill, please read the instruction carefully.
Storage and Moving Instruction 1.storage: This treadmill have two obvious advantages: 1. storage is simple and fast; 2. Small space occupation; CAUTION: It’s not safe by positioned vertically. 2.Moving the Treadmill: The treadmill has a built-in wheel that can be easily moved. CAUTION: Before moving the treadmill, make sure that the power cord of the treadmill has been removed, or it may damage the plug and socket.
DANGER Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
minutes in 1 km. If you feel comfortable at the stable velocity, you can add the speed and incline, after 30 minutes, you can have good exercise. At this stage, you can not add the speed or incline too much at one time, it can keep you feel comfortable. Exercise intensity: Warm up at the speed 4.8 km/h in 2 minutes, then add the speed to 5.3 km/h and keep walking in 2 minutes, then add to 5.8km/h and walk in 2 minutes. After that, add up 0.
WARM UP STAGE Before exercise, it is better to do stretching exercises . Warm muscles stretch more easily, so the first of 5 ~ 10 minutes to warm up. Then in accordance with the following methods to stop and do stretching exercises - do five times, each leg every time 10 seconds or more time to do it again after the end of the exercise. 1. Down the stretch: knees slightly curved, the body bent forward slowly, so that the back and shoulders relaxed, hands try to touch your toes.
Exploded Drawing 9
Parts List NO. DESCRIPTION QTY NO. DESCRIPTION QTY 1 Main frame 1 21 motor upper cover 1 2 Bolt M8*35 2 22 motor bottom cover 1 3 Bolt M8*45 3 23 Computer pannel 1 4 Bolt M8*15 2 24 Left rear tailstock 1 5 Bolt M6*45 2 25 Right rear tailstock 1 6 Bolt ST4.8*30 6 26 Side rail 1 7 Bolt ST4.2*16 11 27 Left footpad 1 8 Bolt ST4.2*16 2 28 Right footpad 1 9 Bolt ST4.2*16 10 29 Left front adjusting pad 1 10 Bolt ST5.
41 connect cable 1 1 46 42 connect cable 2 1 47 43 Control 1 48 44 connect cable 3 1 49 45 Remote control 1 50 Computer PCB 1 Computer Operation Guide 1. LED WINDOW DISPLAY “ SPEED ” :Under running status displays the current values for speed, the speed range is 0.8-6.0KM / H. “TIME” : Displays the time for sport. The time ranges from 0:00 to 99:59. “DIS” : Displays the distance traveled. The account value from 0.00-99.9. “CAL ”: Displays the calorie consumption and heart rate.
3.SLEEP FUNCTION: Stopped for more than 6 minutes without any operation, the system completed all showed off into the body of sleep state. Press any key to wake up. 4. TURN OFF: At any time by turning off the power switch can turn off the treadmill, this does not damage the treadmill. 5. ATTENTION: Appeared the abnormalities during movement, press the stop button, the treadmill will quickly decelerate to stop; If any questions of the treadmill.
Light user (less than 3 hours/ week) once six months Medium user (3-5 hours/ week) once three months Heavy user (more than 5 hours/ week) once a month We recommend that you buy the lubrication from our distributor or directly to our company. Attention: Any repair need the professional technician. We suggest that you should cut off the power for 10Mints after keep running 2HS ,so that it’s good for maintain the treadmill.
TROUBLE SHOOTING GUIDE CODE REASON SOLUTION 1. the communication line is damaged or poor 1. check the upper and lower communication Er1/Er7 connection; line connection is good or damaged; 2. electronic watch or control board damage 2. replace the electronic form or control board Er3 Over voltage Er4 Over current Er5 Over load Er6 Motor is not properly connected 1. Restart the treadmill,check if it is normal 2. replace the control board 1. Restart the treadmill,check if it is normal 2.
App Installation Scan the QR barcode to directly locate FitShow in the App Store on your device. Note: In order to scan the QR Code,you must first download the QR READER App on your device. Available in both Apple Store & Google Play Store.
App Instructions 1 . Creat a username and password 1-1. For first-time users, you must first register a user name and password to save your personal record. If you are registered, please enter your username and password. 1-2. Please use registered mail or mobile phone number, and then enter your account number and password registered sports show.
2 . How to sync device 2.1 Search equipment 2-1. Open sports show APP please open your Bluetooth device. Click on the home page of the blue button search device for fitness equipment search.
2.2 Connecting equipment 2-2. Bluetooth scanning is completed, sports show will automatically search your mobile phone near the sports equipment can be connected.
2.3 Connect successfully 2-3. After a successful connection, can be selected according to the mode of exercise you need to.
3 . Operational Instructions 3.1 Motion setting 3-1. Change is set in motion in the home or about the movement of the interface on the upper right corner of the "Settings" button, set. The settings include "voice prompt", 'screen light', 'voice type', 'reminder frequency'.
3.2 Select mode 3-2. After connecting the device, the application will display two modes, you can choose any mode according to your needs, and then click the "start" button for movement.
3.3 Start exercis When you start the exercise, the mileage in your exercise, when used, with speed, consumption, heart rate and other data will be displayed on your phone; you can click on the corresponding data, other data switching. If you are moving the map mode, click on the lower right corner of the motion map button, you can switch to the map mode interface, view your trajectory.