FAQ

FAQ

1) How do the damper and the thermostat communicate?

They communicate through an IR signal (no cables needed)

2) How is the installation process?

The 5-min installation video shown below, explains the process:

http://www.youtube.com/watch?v=fZTJDdTEbbw

3) How many OneZone Single can be installed?

We recommend installing OneZone Single units in up to 30% of the total number of

outputs/vents of the house. If the house has 10 vents, 3 OneZone Single can be installed.

4) How far from the grill can the thermostat be located?

It can be located up to 50 feet away from the grill. But in order to work properly and detect the

right temperature of the room, it should be located near the grill in a place with good air

circulation. That’s why we recommend to locate the thermostat 15 feet away from the grill.

5) What size of dampers are available?

OneZone Single damper comes in three sizes for round ducts: 6’’, 8’’ and 10’’.

6) Is there a OneZone Single for square ducts?

No, we are in the process of developing this new product.

7) How does OneZone Single work?

The user selects the desired temperature, the damper’s gate opens to let hot or cold air

(depending on the mode the unit is running), when the selected temperature is reached, the

damper’s gate closes automatically. This process is repeated when the temperature changes.

8) When does the OneZone Single damper close?

Cooling mode: It closes when the temperature of the zone where the OneZone Single is

installed is lower than the selected temperature on the OneZone Single thermostat.

Heating mode: It closes when the temperature of the zone where the OneZone Single is

installed is higher than the selected temperature on the OneZone Single thermostat.

9) Can OneZone Single be installed in a two grills room?

PAGE 1
FAQ 1) How do the damper and the thermostat communicate? They communicate through an IR signal (no cables needed) 2) How is the installation process? The 5-min installation video shown below, explains the process: http://www.youtube.com/watch?v=fZTJDdTEbbw 3) How many OneZone Single can be installed? We recommend installing OneZone Single units in up to 30% of the total number of outputs/vents of the house. If the house has 10 vents, 3 OneZone Single can be installed.
PAGE 2
If both grills are for air supply, you can install two OneZone Single dampers, but only one thermostat. The thermostat needs to be located equidistant from both grills. So when the temperature is set on the thermostat, the two dampers will get the IR signal, and adjust the temperature of the room. The same happens for a zone that has 3 grills. 10) Does OneZone Single work with either air conditioning or heating? Yes. The user just needs to select cooling mode or heating mode as desired.