User's Manual

102 • Hardware Onity HT24W / HT28 Smart
HT22iP Encoder (HT Proximity Only)
The HT22iP encoder has the capability of encoding both Magnetic Stripe keycards
and Proximity cards and tokens. This encoder can either be part of a computer based
system (HT24W, HT28, EntryFlex) or a stand alone system (HT22).
For standard operating details, refer to your system user manual. The information in
this document only covers the features related to the HT Prox product.
Encoder Setup (HT22iP only, HT Proximity Only)
To setup the encoder to allow both magnetic stripe and proximity encoding, do the
following:
• Press and hold the ‘Exit’ button for 5 seconds to enter the setup menu.
• Arrow down to ‘Card Tech. #1’ and press ‘Enter’
• Select ‘Mag. Stripe’ and press enter
• Arrow down to ‘Card Tech. #2’ and press ‘Enter’
• Select ‘Prox.’ and press ‘Enter’
• Press the ‘Exit’ button to leave the setup menu
The encoder is now setup for both magnetic stripe and proximity encoding.
Proximity Only Setup (HT22iP only, HT Proximity Only)
If the facility only uses the Proximity locks, the magnetic stripe encoding can be
disabled. Do the following to setup the encoder for proximity only encoding: