User's Manual

104 • Hardware Onity HT24W / HT28 Smart
HT22P Encoder (ADVANCE RFID / HT RFID Only)
The HT22P encoder is used specifically with Advance RFID and HT RFID cards and
tokens, and is NOT compatible with HT Proximity systems. The encoder cannot
encode HT Prox cards or be used at HT Prox installations. This encoder must be
used in conjunction with a computer based system (HT28) and is not to be used as a
stand alone system .
Physically, the HT22P encoder can be distinguished from the HT22iP by the lack of
a card insertion slot.
Encoder Setup
Do the following to setup the encoder for Advance RFID or HT RFID encoding:
• Press and hold the ‘Exit’ button for 5 seconds to enter the setup menu.
• Arrow down to ‘Card Tech. #1’ and press ‘Enter’
• Select ‘Prox.’ and press enter
• Arrow down to ‘Card Tech. #2’ and press ‘Enter’
• Select ‘CLR=None’ and press ‘Enter’
• Press the ‘Exit’ button to leave the setup menu