User's Manual

Onity HT24W / HT28 Smart Hardware • 105
Proximity Encoding
When prompted for proximity encoding, present the proximity card or token to the
Prox Logo on the encoder. When the encoder is ready to encode a proximity key, it
will begin to beep. Present the card at the logo point shown below. The encoder will
emit a louder beep when the encoding has been completed.
Connections
1. Not Used With This System 6. On/Off Switch
2. HTCOM Connection – AB Format 7. Not Used With This System
3. Firmware Update Connection 8. HTCOM Connection
4. 12/15VDC Power Input 9. HTCOM Connection
5. Strain Relief