User's Manual

112 • Hardware Onity HT24W / HT28 Smart
• The Exit key is used to cancel a transaction, or to answer NO to
a choice on the screen.
•
The four arrow keys are used to scroll through the menu options
and selection lists on the XPP
XPP Soft Keys
The four keys at the top of the XPP keypad are called Soft Keys. The functionality
of these soft keys changes based on the menu or option that is currently selected. On
the screen above these soft keys, the current function is displayed.
XPP Menu Options
Update Lock
Update is used to make the data in the lock match the data in the front desk console.
You will update a lock for the following reasons:
• Twice each year to load the daylight savings time information.
• If you change the code of a Programming Card, a Canceling Card, or a
Blocking Card.
• If a change is made to the locking plan such as adding new doors or
new master cards.
Update will also notify a lock if a master card has been changed.
To update the information in a lock, you must first download the data from the front
desk computer to the PP.
After the XPP is loaded with data, go to the door that is being updated and follow
these steps:
1. Plug the XPP into the lock using the XPP to Lock cable.
2. Press the ON key to turn on the XPP.
3. Enter your password if using XPP operators.
4. Select Update Lock and press Enter.
5. Press the green Enter key again. It is not necessary to choose a room
number at this point because the XPP will read the number from the
lock.
6. Unplug the XPP when it is finished.
Initialize Lock
The INITIALIZE function is generally used the first time a lock is installed. It
establishes the room number for the lock and loads all the lock data. You should only
use this function if you have replaced a lock on a door.
To initialize a lock, follow these steps:
1. Turn the XPP ON, enter password if applicable, and select
INITIALIZE with using the arrow key and press Enter.
2. Use the arrow keys to select the room number. Make certain to select
the CORRECT room number.