User's Manual

114 • Hardware Onity HT24W / HT28 Smart
4. Press the Enter key again and operate the outside handle, the deadbolt,
and insert a card. For each of these operations you should see a
message that indicates that the corresponding switch in the lock was
activated. If you do NOT see a message for any of these operations, or
if the message remains on the screen after you have completed the
operation, the lock needs to be repaired.
5. Press the Enter key again. If your lock has a keyboard, press the
buttons. The character you press should be displayed.
6. Press the Enter key again. You will see “MAN. DATE” and the
manufacturing date of the lock electronics.
7. Disconnect the XPP.
8. Insert and remove the Diagnostic Card. You should see a green light.
Go to the next door.
NOTE: It is a good idea to use the Diagnostic Card during this test. You will need
a card anyway to perform the card switch test and the Diagnostic Card can be used
for this purpose.
NOTE: The TEST function may also be used to indicate why a card was rejected
by the lock. Simply connect the PP to the lock, select the TEST function, and insert
the card in the lock. The PP will display the reason the card was rejected.