User's Manual

Onity HT24W / HT28 Smart Software - HT24W / HT28 Smart • 13
staying.
Type a number or use the UP/DOWN ARROW keys to set the number
of nights for the stay and press the ENTER key.
7. If your property uses a starting date on guest cards, the cursor will
highlight the start date. The default start date is today. You can use the
number pad to set the starting date of the card. To change the starting
time, press the TAB key to move the cursor to the time and use the
number keys to change the time. Press ENTER to continue to the
Expiration date and time.
8. The software will convert the number of nights into the expiration date.
You may make any changes you wish to the check-out date and time by
using the number keys to enter the new hour, day, month or year. Press
ENTER to continue to Track 1 and 2 data.
9. If you are using magnetic cards and a motorized encoder, you are able
to encode information on tracks 1 and 2 of your card. This information
is not needed to operate the Onity locks, but is commonly used for
Point Of Sale (POS) systems. Track 1 data can contain letters or
numbers and track 2 data can contain only numbers.
When you are ready to encode the card, press the ENTER key.
A message will appear on the screen instructing you to insert the card. When
encoding is complete, a message will instruct you to take the card. When you are
finished making the card, select another function, or press the F9 key to log out of
the system.