User's Manual

24 • Software - HT24W / HT28 Smart Onity HT24W / HT28 Smart
Follow these steps to set up the definition of the openings you wish to see:
1. Select Peripheral Openings from the Reception Menu, or click on the
Peripheral Openings Tool.
2. Using the date filter, you can limit the openings you see to only those
in the time frame that interests you. The default dates are the beginning
of this year and today, but you can set these limits to any dates you
choose. Type a date or use the UP/DOWN ARROW keys to change the
dates to limit your search. Only those openings that fall between the
dates will be shown.
3. The Function Filter can further limit your search to only those openings
that interest you. You can view all openings, only the openings for a
particular guest room card, special operations, or openings of a
particular master card. Special operations include the use of the Exit
Button, Spare Cards, Programming Cards, Canceling Cards, and other
operations that might interest you.
4. When you are satisfied with your filter criteria, click the OK button to
view the openings. If the list of openings does not contain the event
you were searching for, you can modify your filter at any time. To
reset all the filters back to the default, click the Reset button.
The Openings List
Valid uses of an entrance
reader appear in black, and
valid uses of an exit reader
are in green.
The openings list is a table showing all of the openings from the selected peripherals
or doors that match your filter criteria. The table shows the date, time, and which
card was used.
The table shows the openings in Real Time. This means that if someone uses their
card in an online peripheral, you will see a record of the opening within moments of
the actual event. The system will scan the peripheral every few seconds and any new
openings will be added to the bottom of the list. If your list is long, you may wish to
turn this feature off while you look at your list so that the list is not changing. To
turn off the Real Time feature, click the check box at the top of the window so that
there is no check in the box.