User's Manual

Onity HT24W / HT28 Smart Software - HT24W / HT28 Smart • 25
N
avigation Buttons
With the Real Time feature turned off, you can use the special navigation buttons to
move to the first record at the top of the list, to the previous record, to the next
record, or to the last record at the bottom of the list.
To print your list, click on the Print button at the top of the window.
Logout / Login (F9)
D
esigned for keyboard use!
This function logs the current operator out of the system and locks the system so that
an operator must enter a valid password before any new function can be performed.
Workstations, terminal encoders and other on-line devices will still function properly
while no one is logged in to the software on the server.
When logged out, this function key is used to login an operator. Simply press F9 and
enter your password to log into the system.
To logout of the software, press the F9 key or select Logout from the Reception
Menu.
Exit
This function logs the current operator out and closes the software. PC workstations
will still function properly if this function is performed on the server, but terminal
encoders and the PMS interface are shut down.
Task List
If there is a task running in an encoder, such as a PMS command waiting for the desk
clerk to perform the operation, the system will display them before you exit the
software. You can complete these tasks or discard them. This warning is to prevent
you from accidentally losing information or commands from the PMS