User's Manual

32 • Software - HT24W / HT28 Smart Onity HT24W / HT28 Smart
6. Next, choose a time at which point the user card will be active. This
option will only appear if you are using user card activation dates.
7. Finally, if you want the master card to expire make sure the Use
Expiration Date box is checked and the date is the way you want it. By
default, the card will expire in one day.
Note: Onity recommends that you encode all master cards with an expiration date.
This can be the best way to reduce the threat of a lost card.
Revalidation Tab
The Revalidation tab contains the settings for using the revalidation system. If you
are not using this system in your facility the information on this tab is not
important.
1. The PIN information section applies when the master user uses a
revalidation terminal. If your facility is not using the revalidation
function, leave the PIN Information section completely blank.
• PIN – This is the Personal Identification Number that may be
required for the user to use a re-validation terminal.
• Ask PIN to revalidate card – If this box is checked, the user will be
required to enter the PIN to use the re-validation terminal.
• User MUST modify PIN – This box indicates that a user must
change his or her PIN during the next use of the revalidator.
• User CAN modify PIN – If this box is checked, the user has the
option to change his or her PIN during the next revalidation
session.