User's Manual

44 • Software - HT24W / HT28 Smart Onity HT24W / HT28 Smart
4. Connect the Portable Programmer and turn it on. See the System
Components section of this manual for details about connecting the
Portable Programmer.
5. Select Load Portable Programmer from the Maintenance menu or click
on the Load Portable Programmer tool and choose Regular
Programmer.
6. Before you load data into the programmer, you must decide what data
you need to load. You can choose one of three choices. To select one,
click on the option button beside your choice.
• All Doors – Loads data for all of the stand alone Onity locks for
your hotel, or as much data as the Portable Programmer can hold.
• Select Doors – Loads only the data for the doors you select. This
option can save you time if you only need to visit a few doors.
Click on the Select Doors button to pick from the list.
• Doors Needing Updates – Loads data for any doors that need
updating. Doors can need updates because of changes in mastering
schemes, changed master, blocking, or programming card codes, or
time changes.
7. The PP can be loaded with timetable and code information or only
timetable data. For example, if you only need to set the time in the
locks, for Daylight Savings Time or after changing batteries you only
need timetable data.
8. If you want to be able to open doors with the PP, select this option. If
selected, you must enter a four-digit password. This password may be
different every time you load the programmer. The password is used to
protect the Open function of the portable programmer from being used
by someone else should the PP be lost or stolen. Use the number keys
to enter a password which you will use to unlock doors and press the
ENTER key or click OK.
9. Loading the PP can take a few moments, so wait until the system
confirms that the PP is loaded before you disconnect it from the
computer.