User's Manual

Onity HT24W / HT28 Smart Software - HT24W / HT28 Smart • 45
Extended Portable Programmer (XPP) – No XPP Operators
To load the XPP with current data from the front desk console, perform the
following steps:
1. Connect the XPP and turn it on. See the System Components section of
this manual for details about connecting the Extended Portable
Programmer.
2. Select Load Portable Programmer from the Maintenance menu or click
on the Load Portable Programmer tool and choose Extended Portable
Programmer.
3. Before you load data into the programmer, you must decide what data
you need to load. You can choose one of three choices. To select one,
click on the option button beside your choice.
• All Doors – Loads data for all of the stand alone Onity locks for
your hotel, or as much data as the Portable Programmer can hold.
• Select Doors – Loads only the data for the doors you select. This
option can save you time if you only need to visit a few doors.
Click on the Select Doors button to pick from the list.
• Doors Needing Updates – Loads data for any doors that need
updating. Doors can need updates because of changes in mastering
schemes, changed master, blocking, or programming card codes, or
time changes.
4. Now select the functions that the XPP will be allowed to perform. The
choices are as follows: