User's Manual

46 • Software - HT24W / HT28 Smart Onity HT24W / HT28 Smart
• Update Locks – Allows locks to be updated by the XPP
• Initialize Locks – Allows locks to be initialized by the XPP
• Modifies State of Locks – This feature will allow the XPP user to
change the state of a lock, such as setting a lock to office mode.
This feature is not active as of the writing of this manual.
• Clear Data of XPP – Allows the XPP user to delete locking plan
information from the XPP. It is advisable to clear the XPP data
when you have finished using it. Doing so will protect the
property in the event the XPP is lost of stolen.
• Read Openings – Allows the XPP user to collect openings reports
from the locks.
• See Openings – Allows the XPP user to see the openings reports
on the XPP display.
• Open Locks – Allows the XPP user to open locks.
• Open All Locks – If the XPP is loaded with a selection of rooms
only, the XPP will still be able to open all the locks if this option is
selected.
• Auxiliary Lock 1 – Allows the XPP to open the Auxiliary lock for
a room, typically the in room safe if using safes.
5. If you have selected the Open function, you must enter a four-digit
password. This password may be different every time you load the
programmer. The password is used to protect the Open function of the
XPP from being used by unauthorized persons should the XPP be lost
or stolen. Use the number keys to enter a password which you will use
to unlock doors and press the ENTER key or click OK.
6. Loading the PP can take a few moments, so wait until the system
confirms that the PP is loaded before you disconnect it from the
computer.