User's Manual

Onity HT24W / HT28 Smart Software - HT24W / HT28 Smart • 51
To take a room Out of Service or return a room to active service, perform the
following steps:
1. Select Rooms Out Of Service from the Maintenance menu.
2. You can use the ARROWS or the mouse to select a room. To take a
room out of service or to bring it back into service, Double Click or
press the SPACE bar. To select rooms in a rectangular block, hold
down the left mouse button or hold down the SHIFT key and press the
SPACE bar to toggle.
3. Press the ENTER key or click OK for the changes to take affect.
Mastering Changes
Your hotel may have different mastering schemes set up. Having different schemes
allows you to change the way your guest and master cards operate the locks. It is
easiest to understand the way mastering schemes work with a good example.
Example:
If you occasionally have important visitors at your hotel, you may wish to have a
mastering scheme that only allows guest keys and emergency keys to operate the
guestroom lock.
You may also wish to lock rooms down if they are out of service such that only the
maintenance staff can enter the room.
With these scenarios in mind, we could create the following mastering scheme.
A. Standard – Guest cards and master cards function normally.
B. VIP – Guest cards and the EK card are the only functioning cards.
C. Maintenance – Maintenance master cards are the only cards that
operate the lock.
You can have a maximum of 3 different mastering schemes and you can switch
between these modes of operation at any time without requiring any action from