User's Manual

52 • Software - HT24W / HT28 Smart Onity HT24W / HT28 Smart
Onity. The schemes must be set up by Onity before they are available. If you do not
have mastering schemes set up and you would like to have this feature, call Onity.
To make a mastering change, follow these steps:
1. Select Mastering Changes from the Maintenance menu.
2. The Mastering Changes window shows all of the rooms in the hotel and
the current scheme for each room. The three schemes are labeled A, B,
and C and the description of each can be found in the legend at the
bottom of the window.
You can use the ARROWS or the mouse to select a room. To change
the mastering scheme, Double Click, press the SPACE bar, or press the
letter of the scheme. To select rooms in a rectangular block, hold down
the left mouse button or hold down the SHIFT key and press the
SPACE bar to toggle.
3. Press the ENTER key or click OK for the changes to take affect.
4. You will be asked to confirm that you really want to make the changes.
Click OK to confirm.
5. To inform the locks of the changes, you must load the PP with the new
information and update each lock. A message box will appear asking if
you want to load the PP at this time. If you say no, the changes will not
occur until you update the locks.
Note: You must update the locks with the PP before any changes will take affect.