User's Manual

64 • Software - HT24W / HT28 Smart Onity HT24W / HT28 Smart
actual event. The system will scan the peripheral every few seconds, and any new
openings will be added to the bottom of the list. If your list is long, you may wish to
turn this feature off while you look at your list so that the list is not changing. To
turn off the Real Time feature, click the check box at the top of the window so that
there is no check in the box.
N
avigation Buttons
With the Real Time feature turned off, you can use the special navigation buttons to
move to the first record at the top of the list, to the previous record, to the next
record, or to the last record at the bottom of the list.
To print your list, click on the Print button at the top of the window.
Card Activity Report
Card Activity Report
Available only with
H
T28 Smart!
When smart cards are used by guests or staff in an HT28 smart lock, the lock can
write information onto the smart card after each use. This is one of the most
powerful features of the HT28 smart locks. This information can be very useful in
recognizing problems in the locks or with the cardholders. The information includes
which doors the card has been used to open, when those doors were opened, and if
those doors had low batteries or other maintenance issues.
To see a report of all the collected card information select Card Activity Report from
the Security Menu or click the tool.
Filtering the Card Activity Report
The card activity report can be filtered to show only the data that is interesting to
you. You can view the activity of a particular master user, or the traffic through a
particular door, or any combination. The report can also be filtered by date so that
you get exactly what you want to see.