User's Manual

Onity HT24W / HT28 Smart Software - HT24W / HT28 Smart • 69
Adding Operators
To add a new operator to the system, perform the following steps:
1. Select Operators from the Security menu.
2. Click the Append button at the bottom of the Operators window.
3. Enter the operator’s name in the appropriate. Each operator must have a
unique operator name because this name is recorded in the System
Auditor.
4. Enter a password for this operator. Each operator must have a unique
password. If you enter a password that matches an existing password
you will get an error message.
5. Select the type of operator to setup. If this operator will have access to
the system, choose System operator. If this operator will be an XPP
user, choose XPP operator. If this user will be both a system and an
XPP operator, choose System and XPP Operator.
6. Next, choose the Access level and Language for this operator.
7. If this operator is an XPP operator, choose the appropriate XPP group
and select the XPP functions this operator will have access to.
8. Click OK when finished.