User's Manual

Onity HT24W / HT28 Smart Software - HT24W / HT28 Smart • 75
Change Encoder
There is a feature in the software that allows online devices like encoders and wall
readers to be connected to any Onity computer. Encoders connected to a workstation
computer can be terminal encoders or PMS controlled encoders. In previous systems,
a workstation computer could only control one encoder.
If using this system, you must declare which encoder each workstation will use
locally. Choose Change Encoder from the Configuration Menu, and select the
encoder to be used by the local workstation.
This encoder will be used when making keys from the workstation.
Config. Emergency Reval.
If your system uses the online revalidators, it is necessary to configure the way these
revalidators will operate in case of a system failure causing a loss of communication
between the PC and the revalidator.
To parameters that must be set are:
• Emergency Password – This is the password that must be entered at the
revalidator to enter emergency mode in the case of a loss of
communication with the PC. This password can be up to 8 alpha-
numeric characters long.
• Expiration Date Increment – If it is necessary to use the revalidators in
emergency mode, all users will use the same date increment. Choose