User's Manual

76 • Software - HT24W / HT28 Smart Onity HT24W / HT28 Smart
an increment that works best for your property. This increment can be
a number of hours or a number of days.
• PIN – Finally, you must decide if users will be required to enter their
PIN when operating in emergency mode.
Once communication with the PC has been reestablished, the revalidators will
automatically exit emergency mode and begin working as normal. If you have
disabled any users manually on the revalidators, you must do so again on the PC, as
these changes do not automatically update the PC.
Note: It is imperative that the Emergency Password be remembered. There is
no alternative way to enter emergency revalidation if the password is forgotten,
and your user keys will have no way of being updated.
Check-Out Warning
The system can warn you if you are about to perform a New Guest Check-In for a
room that has not Checked-Out. If you would like to use this feature, select Check-
Out Warning on the configuration Menu. If the feature is active, there will be a
check mark next to the menu item. To deactivate the feature, click again and the
check mark will disappear.
PMS Enabled
If your hotel has a Property Management System that is interfacing to Onity, the
PMS Enabled item on the Configuration menu must be checked. To change the
setting, simply click on the menu item.
Show PMS Communications
When troubleshooting a connection with a PMS, it is often useful to see the data that
flows between the systems. The Show PMS Communications window does this. All
of the valid commands that the system receives and all of the responses it sends to
the PMS are displayed here.