User's Manual

88 • Hardware Onity HT24W / HT28 Smart
[ADVANCE Dual shown]
Modes of Operation and Capabilities HT28 Dual / ADVANCE
Dual
• Standard Guestroom Mode / Suite Mode
The standard operation of an HT28 Dual / ADVANCE Dual lock is
normal guest room mode. In this mode, a single guest card code is
allowed to enter along with any selected master cards. To gain access,
the card must have the proper site code, the correct card code, any
applicable authorization, and within the activation and expiration dates.
• Foyer Mode
A foyer lock does not keep an audit trail or card codes. To gain access,
the card must have the proper site code, any applicable authorization,
and within the activation and expiration dates.
• Selective Mode
The selective lock is a combination of corridor and back-of-house locks
found in HT24 systems. Essentially, a selective lock is a freely keyed
lock that can accept as many as 250 users with an audit trail, or 500
users without. Guest room keys and staff cards can be set to have
access in the locking plan. To gain access, the card must have the
proper site code, the correct card code, any applicable authorization,
and within the activation and expiration dates.
Automatic Code Change – HT28 Dual / ADVANCE Dual
The most important feature of the Onity electronic lock is that it changes its code
automatically for each new guest that checks into the room. Each new guest card
used in a lock will automatically void the previous guest card.