Home Theater System Instruction Manual

Speaker Package

For detailed information, see the pages in parentheses.

■ Front

■ Rear

a STANDBY/ON indicator

With the Auto Standby function, the SKW-570

automatically turns on when an input signal is

detected in Standby mode. When there’s no input

signal for a while, the SKW-570 automatically

enters Standby mode.

b OUTPUT LEVEL control (44)

This control is used to adjust the volume of the

subwoofer.

c LINE INPUT (20)

This RCA input should be connected to the

subwoofer pre out on the AV receiver with supplied

RCA cable.

Note:

The Auto Standby function turns the subwoofer on when

the input signal exceeds a certain level. If the Auto

Standby function does not work reliably, try slightly

increasing or decreasing the subwoofer output level on

the AV receiver (page 72).

Subwoofer (SKW-570)

To AC outlet

Red: Subwoofer in standby mode

Blue: Subwoofer on

HT-S5200_En.book 14 ページ２００９年３月９日　月曜日　午後４時３１分