Operation Manual

Connections

En-7

Connecting CD player, etc., via LINE

Using an audio pin cable, connect to one of the terminal

of LINE IN 1/2/3/4.

Example: Connection with the LINE IN 1 terminal

0 When playing back, turn the INPUT selector and light

up the input source LED corresponding to the

connected terminal. (Example: “LINE 1” when

connected to the LINE IN 1 terminal)

Connecting CD player, etc., via DIGITAL (North

American and Continental European models)

Connect to either COAXIAL (D1) terminal or OPTICAL

(D2) terminal in accordance with the connecting terminal

of the reproduction equipment to be used.

A PCM digital audio can be enjoyed with this unit. Do not

input digital audio signal other than PCM.

Example: Connection with the OPTICAL (D2) terminal

0 When playing back, turn the INPUT selector and light

up the input source LED corresponding to the

connected terminal. (Example: “D 2” when connected

to the OPTICAL (D2) terminal)

Connecting to an Onkyo equipment with RI

terminal

The operation such as power can be linked when

connecting to an Onkyo equipment with RI terminal.

For the connecting and setting methods, refer to